Overview
The Vision X Lighting Amber 360 LED Replacement Bulb, part number 4005204, is an amber LED bulb for turn signals, brake lights, reverse indicators, dome lights and other standard light receptacles. The 360 series uses 5mm LEDs that fit the factory housing the way a standard halogen bulb would.
The bulb is not intended for headlights. LED bulbs use much less power than halogen bulbs and turn on instantly. Because the vehicle does not receive the halogen current draw, turn signals can blink faster; the HIL-Resistor, sold separately, addresses this.
Key features
- Amber 360 series LED design
- 5mm LEDs, with a typical bulb having 28 of them
- Built for standard light receptacles, excluding headlights
- Instant-on operation described by Vision X
- Uses ten times less power than halogen
- HIL-Resistor sold separately for faster blinking
Checking flash rate after the swap
Turn signal flashers are timed to the current drawn by a halogen bulb. An LED bulb draws far less, so the flasher can run quicker than it did before the change. This is a normal effect of swapping bulb types rather than a sign of a fault in the new bulb. Check each amber function once installed, including the hazard setting, so you can see whether the rate has changed.
If the rate is off, a load resistor is the usual remedy, and it is wired in parallel with the bulb on the affected circuit. Some owners prefer to change the flasher unit instead. Either choice should be made with the wiring diagram for your vehicle in hand, and any work on the electrical system should be done with the battery disconnected. Keep the socket contacts clean so the new bulb makes good contact.
Specifications
| Brand | Vision X Lighting |
|---|---|
| Part number | 4005204 |
| UPC | 837544005204 |
| Color | Amber |
| Series | 360 |
| LED size | 5mm |
| LEDs in a typical bulb | 28 |
| Application | Turn signals, brake lights, reverse indicators, dome lights |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit and is not tied to a specific year, make, model or trim. Confirm the socket is a standard receptacle for the light you are replacing, and that it is not a headlight.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
If turn signals blink faster after installation, the HIL-Resistor sold separately is the accessory Vision X offers for that issue. Check local rules on amber lighting for your vehicle before installing.
What’s included
One Vision X Lighting Amber 360 LED replacement bulb, part number 4005204.
Not included: The HIL-Resistor, which Vision X sells separately.









