Offroad Racing
Showing 49–60 of 328 resultsSorted by popularity
-
Offroad Racing
Rugged Ridge Round LED Light and Small X Clamp Kit – 15210.25
- Rugged Ridge 15210.25 round LED light and small X-clamp kit
- Two 3.5-inch round LED lights rated at 18 watts each
- Two black X-clamps for 1.25 to 2 inch diameter tubing
- Universal fit design, not built for one specific vehicle
- UPC 804314268367
SKU: RUG15210.25 -
Offroad Racing
Rugged Ridge Square LED Light and X Clamp Kit – 15210.12
- Universal fit square LED light and X clamp kit, part number 15210.12
- 3 inch square light rated at 16 watts
- Black powder-coated aluminum housing with stainless steel hardware
- Clear lens and a 0 to 10 inch size range
SKU: RUG15210.12 -
Offroad Racing
Rugged Ridge Square LED Light and X Clamp Kit – 15210.03
- Universal fit square LED light and X clamp kit, part number 15210.03
- 16-watt, 3 inch square light with clear lens
- Four CREE diodes rated for 30,000 hours
- Black powder-coated aluminum housing with stainless steel hardware
SKU: RUG15210.03 -
Offroad Racing
Rugged Ridge Square LED Light and X Clamp Kit – 15210.02
- Universal fit square LED light and X clamp kit, part number 15210.02
- 16-watt, 3 inch square driving light with clear lens
- Four CREE diodes with a 30,000 hour life
- Black aluminum housing and stainless steel hardware
SKU: RUG15210.02 -
Offroad Racing
Rugged Ridge Square LED Light and X Clamp Kit – 15210.01
- Universal fit square LED light and X clamp kit, part number 15210.01
- 3 inch square driving light rated at 16 watts
- Four CREE diodes with a 30,000 hour life
- Black powder-coated aluminum housing and stainless steel hardware
SKU: RUG15210.01 -
-
Offroad Racing
Rugged Ridge 3.5 Inch Round LED Light – 15209.01
- Universal fit, not tied to a specific vehicle, with a stem mount
- Rugged Ridge 3.5 inch round LED driving light, part number 15209.01
- 18-watt output from six LEDs
- Black finish with marine grade 316 stainless steel hardware
SKU: RUG15209.01 -
-
-
-
Offroad Racing
Rugged Ridge Fast Track 50 Inch Light Bar Kit – 11232.53
- Fits 2007–2018 Jeep Wrangler JK, including Wrangler Unlimited models
- 50-inch LED light bar with 96 OSRAM LEDs, rated at 17,000 lumens and 144 watts
- Elite Fast Track A-pillar mounting system with channels for accessories
- IP67 waterproof light bar in 6061 T6 aluminum
- Kit includes mounting system, light bar, wiring harness, 2-position rocker switch and instructions
SKU: RUG11232.53
What belongs in this category
Off-road racing lighting covers auxiliary lamps added to a vehicle beyond its factory headlights. The listings here include long LED light bars in single-row and double-row designs, compact cube and round pods, flush-mount and surface-mount lamps, windshield and roof bracket kits, and a few bulb kits for fog lamps. Many pieces are sized for Jeeps, trucks and side-by-sides.
Choosing a beam pattern
Beam pattern matters as much as raw output. A spot beam throws a narrow, long-reaching column of light that helps at higher speeds on open terrain. A flood beam spreads light wide and close, which suits slow rock crawling and wooded trails. Driving and combo patterns mix the two. Diffusion optics soften and widen the light to reduce glare near the vehicle. Many drivers pair a combo bar up high with flood pods low or on the corners.
Specs worth comparing
- Lumens and, more usefully, how the maker rates the beam distance and spread.
- Housing material, lens material and the ingress rating (IP67 or higher is common for dust and water resistance).
- Operating voltage and current draw, so you can size wiring, fuse and relay correctly.
- Mount style: surface, flush, bumper, roof, A-pillar or windshield bracket.
- Whether a wiring harness, switch and hardware come in the box.
Wiring and installation
Use a relay-driven harness with an inline fuse rated for the lights' draw rather than wiring lamps directly through a dash switch. Keep connections sealed, route wires away from heat and moving parts, and avoid drilling roof or body panels without a plan for sealing the holes. Aim lamps after mounting and tighten brackets securely, since vibration on trails loosens hardware.
Think about how the lights will be used before comparing sizes. A trail rig that crawls slowly benefits from wide flood coverage at the bumper or A-pillar, while a truck that runs fast gravel roads or desert washes wants a long-throw bar. Pods mounted low reduce the glare that bounces back off dust, fog and rain, and a bar mounted high throws light farther over the hood. Do not mount lamps where they block the radiator airflow or where the brackets could be struck by brush.
Heat is another point to consider. LED housings use fins or a solid aluminum body to shed heat, and good thermal design is part of why a quality LED lamp keeps its brightness. Make sure the mounting surface gives the housing some air, and check that lenses are polycarbonate or similarly impact resistant, since rocks and branches are a fact of life off-road. A clear cover can protect lenses from stone chips when the lamps are not in use.
Legal and fitment notes
Auxiliary lights are often intended for off-highway use. Rules on lamp color, number of lamps and use on public roads vary by state, so check local regulations and cover lights when on pavement if required. Confirm mounting points and bracket compatibility for your exact year, make and model, and read the manufacturer's specifications before choosing a product below.
Popular Offroad Racing brands
- Rigid Industries (218)
- KC HiLites (49)
- Hella (35)
- Rugged Ridge (26)
- Vision X Lighting (25)
- ARB 4x4 Accessories (20)
- Piaa Lighting (15)
- Pro Comp Suspension (11)
- Spyder Auto Group (11)
- JW Speaker (10)
- Westin (9)
- RT Off-Road (5)
Offroad Racing FAQ
What is the difference between spot and flood LED lights?
A spot beam is narrow and reaches far down the trail, while a flood beam spreads wide and lights the area close to the vehicle. Combo lights blend both patterns. Many off-roaders mix them, using spot for distance and flood for slow technical terrain.
Can I use off-road LED lights on the street?
In most states, auxiliary off-road lights are meant for off-highway use only and may need to be covered or switched off on public roads. Rules differ by state, so check your local regulations and the manufacturer's guidance before driving on pavement with them on.
Do I need a relay for an LED light bar?
A relay is strongly recommended. It lets a small switch control the load while power flows through a fused wire straight from the battery. This protects the switch and wiring and gives the lights consistent voltage, especially with longer bars or several pods.
What does an IP67 rating mean on a light?
IP67 means the housing is sealed against dust and can survive temporary immersion in water, typically up to one meter for 30 minutes. It is a common benchmark for off-road lights that see rain, mud and creek crossings. Check the maker's listed rating for each model.











