Overview
The Rugged Ridge 15210.25 is a round LED light and small X-clamp kit for mounting auxiliary off-road lights to round tubing. The kit pairs two black X-clamps with two 3.5-inch round LED lights rated at 18 watts each. It is a do-it-yourself kit with a straightforward installation.
The clamps are sized for 1.25 to 2 inch diameter tubing. The kit is a universal fit design, so it is not built for a specific year, make or model.
Key features
- Two black X-clamps for 1.25 to 2 inch diameter tubing
- Two 3.5-inch round LED lights rated at 18 watts each
- Smaller X-clamp design, which Rugged Ridge describes as pivotal fit technology
- Patent numbers 9,610,888, 9,145,084 and D773,110 apply to the design.
Measuring tubing and mounting
Round tubing comes in a range of diameters, and X-clamps only grip well within their rated span. Measure the bar at the spot you plan to use, and avoid tubes with dents or weld seams where the clamp cannot seat evenly. A flat spot on the tube gives the clamp a poor grip under vibration.
Mounting height and angle matter for the beam. Set both lights at the same height so the pattern overlaps cleanly, and aim them slightly down to keep glare out of the eyes of oncoming drivers. Tighten each clamp evenly, then recheck the tightness after the first rough drive.
- Avoid dented or welded tube sections
- Level both lights before tightening
- Retighten clamps after the first rough drive
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15210.25 |
| UPC | 804314268367 |
| Light type | Round LED |
| Light diameter | 3.5 inch |
| Light power | 18 watt per light |
| Lights in kit | 2 |
| Clamp tubing diameter | 1.25 to 2 inch |
| Clamp color | Black |
| Clamps in kit | 2 |
| Patent numbers | 9,610,888; 9,145,084; D773,110 |
Vehicle fitment
The kit is a universal fit design, so the lights are not tied to one model.
Measure your bar or tubing before ordering. The X-clamps are sized for 1.25 to 2 inch diameter tubing, and a larger or smaller tube will not fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting relies on the X-clamps gripping round tubing, so confirm the diameter first. Wire the lights through a fused relay and check local rules on auxiliary lights before driving on public roads.
What’s included
Two black X-clamps and two 3.5-inch round LED lights rated at 18 watts each.
Not included: Wiring, a switch and a relay are not part of the kit.









