Overview
The Rugged Ridge HID Off Road Lighting light, part number 15205.03, is a single high intensity discharge (HID) auxiliary light for off-road vehicles. It combines HID bulbs with the rugged construction of Rugged Ridge’s halogen off-road lights, producing a more efficient and powerful beam for lighting the trail at night.
The housing is heavy-duty stamped steel, available in a corrosion resistant black or stainless steel finish. It has waterproof connections, an internal ballast and a reinforced multi-directional mounting base. It is a universal fit light, so it is not built for one specific vehicle.
Key features
- HID bulbs in a halogen-style off-road housing for a brighter, more efficient beam
- HID bulbs are 2 1/2 times more powerful than halogen.
- Draws 60 percent less current than a standard 100W fog light
- Heavy-duty stamped steel housing
- Waterproof connections and internal ballast
- Reinforced multi-directional mounting base with stem mount
- Round housing with clear lens
Choosing a mounting spot
Off-road lights mounted high on a roof or pillar throw light farther down a trail, while bumper-mounted units keep the beam close to the ground for technical sections. The stem mount on this light gives flexibility, but the aim must be set with the vehicle parked on level ground so the beam lands where you expect when driving.
HID bulbs need a moment to reach full output after switching on, and they are sensitive to voltage drops. Keep the ground connection clean and short, and give the ballast room to breathe. Periodic checks of the lens and seal help keep moisture out during wet trail use.
- Aim with the vehicle on level ground
- Keep the ground connection short and clean
- Check the lens seal after wet trail runs
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 15205.03 |
| UPC | 804314217761 |
| Bulb type | HID |
| Light shape | Round |
| Lens color | Clear |
| Size | 0 to 10 inches |
| Housing | Heavy-duty stamped steel |
| Finish | Corrosion resistant black or stainless steel |
| Mounting type | Stem |
| Sold as | Single light |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit light, so no make, model or year applies. Check the stem mount and the 0 to 10 inch size against your bumper, pillar or roof location before installing.
Check the mounting spot on your own vehicle before buying.
Installation notes
The stem mount and multi-directional base hold the aim, so position the light before tightening anything. Wire it through a fused relay, and check local rules on auxiliary lights before driving on public roads.
What’s included
One HID off-road light.
Not included: the pre-terminated wiring harness, relay, impact resistant stone guards and illuminated dash switch, which come with the kit version.












