Control arms explained: fixed, adjustable or long arm, pinion angle and caster, flex joints, upper arms for IFS, greasing, and which arm suits your…
Control Arm Bushing
Showing 49–60 of 124 resultsSorted by popularity
-
Control Arm Bushing
Rubicon Express Super-Ride PTMEG Weld in Bushing Kit (Black) – RE3764
- PTMEG Super-Ride bushing rated at 88A durometer
- Weld-in kit: stamped end ring, one bushing and two metal sleeves
- End ring 2 in OD by 1.5 in wide; sleeves 2 in overall length
- Accepts a 10mm bolt
- Part RE3764, UPC 614901440690, black
SKU: R/ERE3764 -
-
-
-
Control Arm Bushing
Omix-ADA Front Lower Control Arm Bushing – 18283.26
- Fits 2007–2018 Jeep Wrangler (JK) per the manufacturer fitment list
- Front lower control arm bushing for two- and four-door models
- Direct fit across Sahara, Rubicon, Sport and Unlimited trims
- Omix-ADA part number 18283.26, UPC 804314283599
SKU: OAI18283.26 -
Control Arm Bushing
Omix-ADA Control Arm Bushing (Black) – 18280.06
- Fits 1984–2001 Jeep Cherokee (XJ) per the manufacturer fitment list
- Front lower control arm bushing in the forward position
- Black rubber, direct-fit OE replacement design
- Omix-ADA part number 18280.06, UPC 804314050184
SKU: OAI18280.06 -
Control Arm Bushing
Omix-ADA Control Arm Bushing (Black) – 18280.04
- Omix-Ada 18280.04 rubber front upper control arm bushing
- Fits 1991–2001 Jeep Cherokee (XJ), Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims
- Position field reads Front Upper Forward; black finish
- Five year limited warranty
SKU: OAI18280.04 -
-
Control Arm Bushing
Omix-ADA Control Arm Bushing (Black) – 18282.07
- Omix-Ada 18282.07 rubber control arm bushing for the rear lower position
- Fits 1993–1998 Jeep Grand Cherokee (ZJ); confirm year and trim before ordering
- Position field reads Rear Lower Forward; black finish
- Includes one bushing; limited five year warranty
SKU: OAI18282.07 -
Control Arm Bushing
Omix-ADA Control Arm Bushing (Black) – 18282.05
- Rear upper control arm bushing for the 1993–1998 Jeep Grand Cherokee (ZJ)
- Black rubber, Rear Upper Forward position
- Omix-ADA part number 18282.05, UPC 804314052232
- Listed trims include Base, Laredo, Limited, Orvis, SE, TSi and 5.9 Limited
SKU: OAI18282.05
What control arm bushings do
Control arms, sometimes called links, hold the axle in position front to back and side to side while letting it move up and down. The bushings at each end of the arm absorb vibration and permit the arm to pivot. When they wear, you may feel clunks, brake dive, drifting under acceleration or vague steering, and alignment can wander.
Materials
- Rubber gives the quietest ride and most isolation, but it softens and cracks over time.
- Polyurethane is firmer, holds shape and usually resists oil, though it can add noise and harshness if not lubricated correctly.
- Metal or spherical joints give precise control and high articulation, and they are common on heavy trail builds, but they transmit more noise.
Durometer ratings describe firmness. A stiffer bushing improves control but gives up some compliance and may bind with extreme articulation.
Choosing a kit
Kits are built for particular arms, so check the bushing's outer diameter, inner sleeve size, length and quantity. Some kits cover upper and lower arms, and others include only one. Replacement sleeve kits are also available for arms that need new inner sleeves. Aftermarket arms from lift manufacturers may use different bushing sizes than the original, so verify before choosing.
Installation tips
Bushings are usually pressed in and out, which calls for a press or a proper bushing tool. Heat can damage the surrounding metal and should be avoided unless you know the procedure. Support the axle properly and note the position of the arms. The most important step is to tighten the control arm bolts with the vehicle at normal ride height, so the bushings are not twisted. Torque to the manufacturer's specification. Because these parts affect axle location and steering feel, have a shop do the work if you are unsure, and get an alignment afterward. Look over the polyurethane or rubber for any pinching at the bolt sleeve once the bolts are torqued, and check the movement of the arm by hand before lowering the vehicle.
Fitment
Control arm designs differ by year, axle and whether the suspension has been lifted. Confirm fitment for your exact year, make and model, and check the manufacturer's specifications.
Inspection and related parts
When replacing control arm bushings, look at the arms themselves for bends, cracks near the welds and ovalized bolt holes. Replace the bolts if they are stretched or corroded. On a lifted vehicle, arms and bushings carry greater loads, so check them more often. Adjustable arms let you correct pinion angle or caster after a lift, and bushing choice then affects how much movement the joint allows. Bushing wear is often uneven, so replace all bushings on an axle at the same time. Afterward, verify the alignment and look for steering pull or vibration, since worn control arms can shift axle position.
Bushing replacement is a good time to refresh the bolts, nuts and washers. Use grade-rated hardware at the torque specified by the vehicle or arm maker, and apply thread locker only where it is recommended.
Related guides
- Control Arms Explained: Fixed, Adjustable or Long Arm
- Crown vs Omix-Ada: The Jeep Parts Showdown Nobody Explains
Crown Automotive vs Omix-Ada: who makes them, how to read their part numbers, where 2,451 and 1,660 catalog parts overlap, and which to buy…
Popular Control Arm Bushing brands
- Energy Suspension (26)
- Fabtech (20)
- Rubicon Express (19)
- Crown Automotive (14)
- Omix-Ada (11)
- Moog (8)
- Prothane Motion Control (5)
- Pro Comp Suspension (4)
- Prothane (4)
- Tuff Country (4)
- TeraFlex (3)
- Camburg Engineering (2)
Control Arm Bushing FAQ
What are signs of worn control arm bushings?
Clunking over bumps, a wandering feel, uneven tire wear, shifting alignment and visible cracks or movement at the arm ends. Inspect them with the vehicle supported and check for play with a pry bar.
Why tighten control arm bolts at ride height?
If bolts are tightened with the suspension hanging, the rubber or polyurethane is twisted at ride height and wears or tears quickly. Setting the final torque at ride height lets the bushing sit in a neutral position.
Is polyurethane harsher than rubber?
Generally yes. Polyurethane is stiffer and passes more vibration into the cabin, though it gives crisper control and long life. Rubber is quieter. Choose based on whether you value comfort or precision.








