Overview
The Rubicon Express RE3701 is a black rubber lower control arm bushing sold as a factory replacement. It is made to take the place of the worn original bushing in the lower control arm.
Builders may also use this bushing with the Rubicon Express Large Cold Cut End Ring, part number RM12600.
Key features
- Factory replacement design
- Rubber construction in black
- Can be used with the RM12600 end ring when building a control arm
Replacing a worn bushing
A lower control arm bushing sits where the arm meets the axle or frame and absorbs movement as the suspension cycles. Over time rubber softens, cracks or compresses, which can allow play in the arm, clunking over bumps and loose steering feel. Inspect the bushing for splits, tearing and gaps around the sleeve whenever the arm is off the vehicle or during routine suspension checks.
When replacing one, press out the old bushing with suitable tools and clean the bore before fitting the new part. Rubber bushings often wear alongside ball joints and the other arm bushings, so check those at the same time. Use only the lubricant called for in your installation steps, and keep petroleum-based products away from rubber.
- Look for cracks or splits in the rubber
- Check for play in the control arm by hand
- Inspect both sides of the axle for even wear
- Clean the bore before pressing in the new bushing
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3701 |
| UPC | 614901440485 |
| Type | Lower control arm bushing |
| Material | Rubber |
| Color | Black |
| Compatible end ring | Large Cold Cut End Ring, RM12600 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the bushing to the original bushing in your control arm.
