Overview
The Omix-ADA 18280.04 is a black rubber front upper control arm bushing for the 1991–2001 Jeep Cherokee (XJ), sold under part number 18280.04. The position field reads Front Upper Forward, while the product summary also mentions front or rear bushing use, so match the arm location to the old part before fitting.
The bushing is the pivot point where the control arm moves, and rubber bushings like this one wear with age and load. Omix-ADA presents the 18280.04 as a direct fit OE-style replacement intended to match the factory part.
Covered by a limited five year warranty from Omix-ADA. It fits the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims of the 1991–2001 Jeep Cherokee (XJ).
Key features
- Rubber front upper control arm bushing
- Summary mentions front or rear bushing use
- Position field reads Front Upper Forward
- Black finish
- Direct Fit designation and a limited five year warranty
Checking the front upper position
The front upper control arms on an XJ link the axle to the frame and set how the front end moves over bumps and under braking. Their rubber bushings keep that motion smooth and quiet, but they age with heat, road grime and load. A worn bushing commonly leads to a rattle, looseness, or a wheel that seems to move out of line when the vehicle corners.
Before buying, confirm the position on your vehicle. Front upper and rear upper pieces are sold separately, and the arm location decides which bushing fits the bore. Look at the old bushing’s shape and mounting hole. Store rubber parts away from solvents and oil, and inspect the arm for cracks at the same time.
- Match the bushing to the arm’s exact location
- Replace in pairs when both sides show wear
- Check the sleeve for rust or movement
- Use fresh bolts when the old ones are stretched
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18280.04 |
| UPC | 804314052249 |
| Position | Front Upper Forward |
| Color | Black |
| Type | Rubber |
| Fitment type | Direct Fit |
| Warranty | Limited five year warranty from Omix-ADA |
Vehicle fitment
It fits the 1991–2001 Jeep Cherokee (XJ) with the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims. Confirm your vehicle’s year, model and trim before ordering.
Model years outside 1991–2001 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One bushing is included. Check the package contents against your installation before starting.









