Overview
The Omix-Ada 18283.15 is a front upper control arm bushing that fits at the axle end. It fits the 2007-2018 Jeep Wrangler (JK) in 2-door and 4-door models.
This OE-quality bushing fits 2007-2016 Wrangler JK and JKU models in 2WD and 4WD, at the axle side only. It replaces OE# 52060138AA. The front upper control arm is 18285.10, and 2 are required per vehicle.
Key features
- Front upper control arm bushing
- Fits at the axle end (axle side only)
- For 2-door and 4-door models, 2WD and 4WD
- Replaces OE# 52060138AA
- OE-quality replacement part
- Direct fit
Choosing the right setup
Control arm bushings take constant side-to-side and rotational load, so they wear over time. Worn bushings can cause steering wander, vibration or a clunk when the vehicle turns. Because the bushing and the control arm work as one assembly, inspect both when the bushing is replaced.
Before replacing, raise the vehicle safely and check for cracked rubber, torn sleeves or movement at the axle end. Replacing the bushing alone is common, but a bent or worn control arm should be replaced too. After any suspension work, check toe and caster with an alignment, since bushing changes affect both.
- Look for cracked or separated rubber
- Check for movement at the axle end with a pry bar
- Schedule an alignment after the work
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 18283.15 |
| UPC | 804314265465 |
| Product type | Control arm bushing |
| Position | Front upper |
| Location | Axle end (axle side only) |
| Replaces OE number | 52060138AA |
| Related control arm | 18285.10 (2 required per vehicle) |
| Body styles | 2-door and 4-door models |
| Fitment type | Direct fit |
Vehicle fitment
Fits 2007-2018 Jeep Wrangler (JK), including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, X and the Unlimited versions of these trims. Fitment covers 2007-2016 Wrangler JK and JKU, 2WD and 4WD, axle side only.
The bushing is for the axle side only. Model years 2007-2016 are covered, so if you have a 2017 or 2018 JK, confirm the year before ordering. It does not fit the Wrangler (TJ) or the Wrangler (JL). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension parts affect steering, braking and handling, so professional installation is a good choice. Use the correct hardware and torque every fastener to specification. Re-check fasteners after the first miles of driving, have the alignment checked after suspension work, confirm brake line, driveshaft and tire clearance, and check local rules on lift and vehicle modification. Ride height changes can affect headlight aim, so check it afterward.
What’s included
One front upper control arm bushing, part number 18283.15.
Not included: The front upper control arm (18285.10), which is a separate part, and other suspension hardware.












