A complete XJ 4.5 lift needs coils, leaf springs, control arms, a track bar, shocks and brake lines. See the parts, axle limits and…
Coil Springs
Showing 97–108 of 338 resultsSorted by popularity
-
-
-
Coil Springs
Skyjacker 6 Inch Lift Softride Coil Springs
- Front 6 inch lift Softride coil springs, set of 2
- Skyjacker part number 136, UPC 803696102252
- Preset 5160H chromium alloy with a powder coated finish
- Manufacturer fitment list covers 1983–1997 Ford Ranger and 1984–1990 Ford Bronco II
- Limited lifetime warranty from Skyjacker
SKU: SKY136 -
Coil Springs
Skyjacker 4 Inch Lift Softride Coil Springs
- Skyjacker 134 Softride front coil spring set of 2 for a 4 inch lift
- Preset 5160H chromium alloy coils, powder coated black
- Fits Ford Bronco II, Explorer, Ranger and several Mazda pickups, 1983–1997
- Limited lifetime warranty from Skyjacker
SKU: SKY134 -
Coil Springs
Rock Krawler Coil Spring Correction Wedges – RK02659
- Rock Krawler RK02659 polyurethane rear coil spring correction wedges for the Jeep Wrangler JK
- Intended to address rear coil spring bowing, lost spring rate and track bar rubbing
- Part number RK02659, UPC 70000501471
- Confirm your vehicle’s year, model and trim before ordering
SKU: RKSRK02659 -
-
-
-
-
-
What coil springs do
Coil springs carry the vehicle's weight and set its ride height, while shocks control how fast the springs move. A replacement spring changes ride height, load capacity, and how the suspension feels over rough ground. Lift springs are taller or have a different rate to raise the vehicle, while heavier springs help with winch bumpers-bumpers-tire-carriers-winch-mounts-2, roof racks, and gear.
Many products here are sold front or rear, as a pair or a set, and are matched to a specific lift height.
Rates and ride quality
- Single rate springs have a constant stiffness.
- Dual rate and triple rate designs start soft for ride comfort and firm up deeper in travel to resist bottoming.
- Progressive and heavy-duty springs are meant to carry added weight without sagging.
- Stock to mild lift springs restore or modestly raise height after sag.
A taller spring does not automatically ride better. Shock length, travel, and control arms should be matched to the spring height.
Choosing the right spring
Match the vehicle, axle position, and cab or door configuration. Weight matters, so a vehicle with a front winch bumper often needs a different spring than a bare stock one. Compare the stated lift range, because actual height depends on your accessories and the vehicle's condition.
Consider the rest of the system. Larger lifts may need longer shocks, a track bar, adjustable control arms, brake line extensions, and driveline checks. Springs should be replaced in axle pairs to keep height even.
Installation and safety
Compressed coil springs store a lot of energy. Use proper spring compressors or follow the instructions for unloading the suspension, and support the vehicle on jack stands rather than a jack alone. Torque hardware to specification and have the alignment checked afterward. Because suspension affects handling and braking, professional installation is advisable. Lift rules vary by state, so check local regulations, and confirm fitment for your exact year, make, and model.
Checklist before you order
Write down your vehicle, front or rear position, door count, engine, and the accessories you carry. Decide whether you want a true lift or only a restoration of stock height. Note the shock length and travel you have or plan to buy, and the tire size you intend to run.
Measure ride height from the center of the wheel to the fender lip on each corner before and after the swap. Springs settle over the first few hundred miles, so wait before judging final height. Keep old springs until the job is complete and confirmed.
Coil spring height and rate are only part of the picture. Springs interact with bump stops, shocks, and sway bars, so replacing only one piece can leave the suspension out of balance. A spring that is too stiff for the shock valving can feel harsh, while one that is too soft can bottom out.
Spring isolators and bump stop spacers also appear in this category. Isolators cushion the spring seat and cut noise, and should be replaced when old rubber hardens or cracks. Take note of the spring seat design on the axle, since some springs have squared ends and others have tapered ones.
Finally, sagging springs on an older vehicle often wear out together, so replacing the pair on each axle, and checking shocks and control arm bushings, usually gives a better result than replacing a single failing spring.
Related guides
- The XJ Cherokee 4.5-Inch Lift: What a Complete Kit Needs
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Coil Springs brands
- ARB 4x4 Accessories (145)
- Pro Comp Suspension (47)
- Rubicon Express (34)
- Skyjacker (29)
- Fabtech (16)
- TeraFlex (14)
- Rock Krawler (13)
- Icon Suspension (9)
- Omix-Ada (5)
- King Shocks (5)
- Crown Automotive (4)
- RockJock 4x4 (4)
Coil Springs FAQ
Should I replace coil springs in pairs?
Yes, replace both springs on an axle together. Mixing a new spring with an old one can produce uneven ride height and handling. Matching the front and rear set to each other also helps keep the vehicle level.
What is a dual rate spring?
A dual rate spring has two stiffness zones. The softer section absorbs small bumps for comfort, and the firmer section engages as the suspension compresses, which helps resist bottoming out. Triple rate designs add another transition.
Will new springs fix a sagging vehicle?
Often yes, if worn springs are the cause. A stock-height replacement can restore ride height, while a mild lift spring adds some on top. Check shocks and bushings as well, since they wear too.
Do I need other parts with a lift spring?
Often. Taller springs can require longer shocks, brake line extensions, track bar or control arm adjustment, and an alignment. The amount of lift decides what is needed, so read the maker's instructions.









