Overview
Part 2943 is a heavy load Old Man Emu coil spring with UPC 9319092023585. It is a direct fit spring, and no model accompanies it.
A heavy load rating is meant for vehicles that carry a lot of weight, with the coil set to keep handling in control. The lift that comes with the spring follows from that rating.
Key features
- Heavy load rating for a stiffer setup
- Direct fit label without a named vehicle
- Part number 2943 with UPC 9319092023585
Load rating and daily use
A heavy load rating is set for trucks that carry substantial weight, such as tow loads, fuel and gear for extended trips. A stiffer spring holds the corner up under that weight and resists sag, but it also transmits more of the road surface to the cabin. Choosing it means accepting a firmer ride when the truck runs light.
Because the coil is stiffer, the rest of the suspension is working against a different baseline. Bump stops and shock mounts can wear faster if they are already tired. Inspect them while the vehicle is lifted for fitting, and keep an eye on tire wear at the front after the change.
- Weigh the truck as it is normally loaded
- Expect a firmer ride when lightly loaded
- Inspect bump stops and shock mounts during fitting
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2943 |
| UPC | 9319092023585 |
| Load rating | Heavy load |
| Type | Coil spring |
Vehicle fitment
Identify the vehicle this heavy load coil is for before ordering. Fitment follows the model, not the rating alone.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A heavy load coil changes ride height and the suspension response under weight, so check the alignment and headlight aim after fitting.
Compare the heavy load rating with the weight your truck carries, and confirm the year, model and trim before buying.



