Overview
The ARB 2932 is an Old Man Emu coil spring, part number 2932, with UPC 9319092023479. Vehicle fit is open for this coil, so identify your truck first and confirm it before ordering.
Old Man Emu coils take the load capacity of the vehicle into account, along with handling and control. The spring is one that should be matched to its vehicle before it is fitted.
Key features
- Direct fit label without a named vehicle
- Shaped around the load capacity of one vehicle
- Part number 2932 with UPC 9319092023479
Ride height and alignment
Ride height is set by the springs and the way they sit on the suspension, so a new coil can move the corner up or down. Once fitted, the alignment is a good time to confirm the wheels still point straight and the tires wear evenly. Headlight aim should be checked too, because a changed corner height shifts where the beam lands on the road.
Measure the height at each corner before the old coil comes out, using the same reference points you will use afterward. Write the figures down so any difference is easy to judge. If the corner sits noticeably off after fitting, recheck the mounts and the spring seat before assuming the coil is at fault. Keep the same tire pressure during the comparison.
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2932 |
| UPC | 9319092023479 |
| Type | Coil spring |
Vehicle fitment
Fitment for this coil is not established. Check that it suits your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing a coil spring changes the ride height and the suspension geometry at that corner. Have alignment and headlight aim checked afterwards, and confirm the vehicle before ordering.
Shaped springs suit one vehicle each, so verify the fit for your truck before purchase.
Note the existing ride height before removing the old spring, and compare it again once the new coil is fitted.



