Overview
The ARB 2939 is an Old Man Emu coil spring, part number 2939, with UPC 9319092023547. Confirm that it suits your vehicle’s year, model and trim before ordering.
The coil is designed around the load capacity of the vehicle it is made for, with handling and control as the priority. Confirm that vehicle before ordering.
Key features
- Designed around one vehicle’s load capacity
- Handling and control are the priority
- Part number 2939 with UPC 9319092023547
Choosing and replacing a coil
A coil spring carries part of the vehicle’s weight at each corner, so it sets ride height and how the suspension reacts to load. Replacing a coil changes the height of that corner and how the control arms and shock are loaded. Measuring the old ride height before removal gives a reference for judging the new spring. Spring rate, free length and the seat at each end all affect how the truck sits, so matching the spring to the vehicle matters more than matching its look.
Older coils often sag over time, especially on vehicles carrying heavy bumpers, winches or roof racks. Signs of wear include a low corner, uneven tire wear, a bouncy ride and clunks over bumps. Replacing both coils on the same axle keeps the two sides balanced.
- Measure ride height on both sides before removing the old coil
- Check upper and lower spring seats for wear
- Inspect shocks and bump stops at the same time
Specifications
| Brand | ARB 4×4 Accessories (Old Man Emu) |
|---|---|
| Part number | 2939 |
| UPC | 9319092023547 |
| Type | Coil spring |
Vehicle fitment
Coil springs are tuned to a vehicle’s load, so fit depends on the model the spring was made for.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitting a new coil changes the height of the corner it supports, so the alignment and headlight aim should be checked after installation.
Confirm that the spring is made for your vehicle before ordering, since springs are tuned to one vehicle’s load.
Measure the existing ride height before the old coil comes out, and check it again after the change.



