Overview
The Poison Spyder Hood Louver in black powder coat, part number 13-53-010-PC, is a laser-cut aluminum vent for Jeep hoods. Its purpose is to help keep the engine running cool by promoting airflow through the engine compartment. No model years or chassis codes are named for this louver, so the vehicles it suits are not confirmed here.
Several things can push under-hood temperatures up: headers, slow speeds, flex fans and a crowded engine bay that does not vent well. At trail speed the engine gets little moving air, and hot air sitting at the top of the compartment is the usual result. A louver of this kind cuts a path for that air while letting cooler air come through the radiator.
Key features
- Black powder coat finish
- CNC laser-cut and die-stamped aluminum sheet
- Keeps the engine cooler by improving airflow
- Easy installation with a template
- Stainless steel fasteners
Hood vent maintenance
A hood louver is mostly a fixed panel, so upkeep is simple. Look over the powder coat for chips after rough trail use, since exposed aluminum can pick up corrosion. Touch up small chips with a matching paint, and keep the fasteners snug so the louver does not rattle or work loose on the hood.
Hood vents can collect mud and leaves over time. Clean the openings with water and a soft brush, and check that nothing is blocking the airflow path underneath. If the louver is used with washer nozzles, confirm the spray still reaches the windshield after any adjustment.
- Inspect the powder coat for chips after off-road use
- Retighten fasteners after the first few drives
- Clear mud and debris from the openings
- Check washer spray after installation
Specifications
| Brand | Poison Spyder Customs |
|---|---|
| Part number | 13-53-010-PC |
| UPC | 614901724660 |
| Finish | Black powder coat |
| Material | Aluminum sheet, thick gauge |
| Construction | CNC laser-cut and die-stamped |
| Installation | Template included, requires drilling and cutting the hood |
Vehicle fitment
Compare the hood on your vehicle against the template before you cut. Confirm the fit for your vehicle’s year, model and trim before ordering, since no model years or chassis codes are listed.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The job needs drilling and cutting the hood, and the template is the guide for both. Stainless steel fasteners are supplied to hold the louver. Check each mark against the template before cutting, since a mistake in the hood cannot be fixed with the louver.
Hood louvers are fairly easy to install, but they require careful layout before any holes are cut. Once the template is set on its marks, do not move it. The black powder coat is the finish supplied on this part number.
What’s included
One black powder coated hood louver, a template with instructions and stainless steel fasteners.
















