Overview
The Tomken Machine Transfer Case Skid Plate (Black), part number TOMTMS-1332-PA (TMS-1332-PA), is a black powder coated transfer case skid for the Jeep Cherokee (XJ) with the NP231 transfer case.
It fits the Jeep Cherokee (XJ) with the NP231 transfer case. Confirm fit for your vehicle’s year, model and trim before ordering, since the year coverage for this plate needs checking. Tomken Machine also makes skid plates for gas tanks, U-bolts and transmissions, so this transfer case plate can be part of a larger set.
Key features
- Transfer case skid plate for the XJ Cherokee with the NP231 transfer case
- Black powder coat finish
- Fit check: 14″ between the back of the lower control arm mount and the front edge of the cross member
- No cutting or drilling required
- Direct-fit design for the XJ Cherokee with the NP231 transfer case.
Protecting the drivetrain underside
A transfer case skid plate sits below the transfer case and takes the hits from rocks, stumps and ledges that would otherwise strike the housing. On a trail, the transfer case is one of the lowest points of an XJ, and a dent or cracked case can end a day’s run. A plate spreads an impact across a wider area and keeps the case’s bolts and seals out of the direct path of debris. Skids are most useful when crawling over uneven ground at low speed, where a drag across a rock is more likely than a clean bounce.
Before installing, look over the existing mounting points and the surrounding crossmember for cracks or bent metal, since a skid can only protect what it is fastened to. Check the transfer case drain and fill plugs and the shift linkage for clearance once the plate is in place. Skids are often replaced alongside a fuel tank guard or a transmission skid, so it is worth reviewing the other lower protection on the vehicle at the same time. Re-check the fasteners after the first few trail runs, since vibration can loosen bolts over time.
Specifications
| Brand | Tomken Machine |
|---|---|
| Part number | TOMTMS-1332-PA |
| Product type | Transfer case skid plate |
| Finish | Black powder coat |
| Transfer case | NP231 |
| Fit measurement | 14″ from the back of the lower control arm mount to the front edge of the cross member |
| Fitment type | Direct fit |
| Installation type | No cutting or drilling required |
Vehicle fitment
It fits the Jeep Cherokee (XJ) with the NP231 transfer case. Confirm the year range against your vehicle before ordering.
This plate is sized for the XJ Cherokee with the NP231 transfer case. Confirm your vehicle’s year, model and trim before ordering, since other Jeep models fall outside this fit.
Installation notes
Tomken Machine says no cutting or drilling is required. Measure the distance from the back of the lower control arm mount to the front edge of the cross member before installing and compare it with the 14″ figure Tomken gives.
What’s included
Check the package contents against your installation before starting.









