Overview
The Bestop rear wiper motor assembly, part number 54858-01, is a rear wiper motor for the Bestop Trektop Pro and factory soft tops on Jeep Wrangler (JK) models. It fits 2007–2015 and 2017–2018 Wrangler JK vehicles in both 2-door and 4-door versions.
The motor connects to the rear window defroster through a harness that depends on the vehicle. On a Wrangler with a factory hardtop, the Trektop Pro harness plugs into the factory harness and no additional harness is needed. On a Wrangler without a factory hardtop, the 54857-01 Wiring Harness is needed for the defroster, and it is sold separately. Running the rear wiper motor together with the defroster also requires a Mopar factory harness.
Key features
- Designed for the Bestop Trektop Pro and factory soft tops
- Suits 2-door and 4-door Wrangler models
- No additional harness on Wranglers with a factory hardtop; the Trektop Pro harness plugs into the factory harness
- Wranglers without a factory hardtop need the 54857-01 Wiring Harness for the rear defroster
- Rear wiper and defroster together: 54858-01 plus one Mopar harness, JEP82210215AG, JEP82212859 or JEP82212860
Rear wiper wiring basics
A rear wiper motor works with the vehicle’s wiring, so the harness route matters as much as the motor itself. Before installing, identify whether your Wrangler has a factory hardtop, since that decides which harness connects to the factory system. Keep the wiring away from moving parts and the top’s folding frame, and secure each run with clips so it does not chafe during top installation or removal.
Soft top wiring is often replaced along with the motor when the rear window or defroster is serviced. Check the connectors for corrosion and bent pins, and inspect the seal where cables pass through the top. A wiper that moves slowly or stops partway through its sweep often points to a weak connection or a worn motor, so check the wiring before replacing parts.
- Identify whether your Wrangler has a factory hardtop first
- Route cables away from the folding frame and moving parts
- Inspect connectors for corrosion and bent pins
- Check the cable pass-through seal for wear
Specifications
| Brand | Bestop |
|---|---|
| Part number | 54858-01 |
| UPC | 77848128050 |
| Component | Rear wiper motor assembly |
| Compatible tops | Bestop Trektop Pro and factory soft tops |
| Body styles | 2-door and 4-door |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2007–2015 and 2017–2018 Jeep Wrangler (JK), including the 70th Anniversary, Rubicon, Sahara, Sport and X trims, plus the Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X versions.
The list has no entries between 2015 and 2017 and does not include the Wrangler TJ, LJ or JL generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
On a Wrangler with a factory hardtop, plug the Trektop Pro harness into the factory harness. On a Wrangler without one, the 54857-01 Wiring Harness is needed for the defroster. For both the defroster and the rear wiper motor, use 54858-01 plus one Mopar harness.
What’s included
Check the package contents against your installation before starting.
Not included: the 54857-01 Wiring Harness and the Mopar factory harness parts needed for the defroster, sold as separate purchases.




















