Overview
The MasterTop Windshield Header, part number 14700201, is a pre-assembled mounting header for MasterTop Bimini tops and Bimini Top Plus tops. Because those tops need a windshield header to attach properly, this is the piece that holds the top on a Jeep.
It arrives pre-assembled and is ready to install. Mounting uses two small bolts, and drilling is required. The header is custom fit for a tight, noise-free fit and a weather tight seal.
Key features
- Arrives pre-assembled for quicker installation
- Needed to mount MasterTop Bimini and Bimini Top Plus tops
- Mounts with two small bolts
- Custom fit for a tight, noise-free fit
- Drilling is required
Bimini top mounting basics
A Bimini top needs a fixed point at the front to stay taut and shed water. The windshield header gives the top that anchor, so the frame sits firmly rather than flexing in wind. Before you start, look at the top’s mounting straps and frame tubes so the header lines up with the attachment points.
Drilling changes how the mount works, so measure twice and check that holes will not land on wiring, brake lines or the windshield frame itself. Use a sharp bit sized for the bolts, deburr the edges, and seal exposed holes if the surface is painted or bare metal. Tighten the two bolts evenly and recheck them after the first few drives.
- Check the top’s frame tubes for bends before mounting
- Keep a bit and sealant ready before drilling
- Re-tighten mounting bolts after the first few trips
Specifications
| Brand | MasterTop |
|---|---|
| Part number | 14700201 |
| UPC | 818068020577 |
| Compatible tops | MasterTop Bimini tops and Bimini Top Plus tops |
| Mounting hardware | Two small bolts |
| Installation | Drilling required |
| Warranty | 3 year limited |
Vehicle fitment
It is made for Jeep use. Model years and chassis codes are unknown, so check your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Drilling is required for this header, so plan the mounting points before you begin the work.
What’s included
The pre-assembled windshield header with the two small bolts used for mounting.
Not included: the Bimini top or Bimini Top Plus that the header is required to attach.












