Select your vehicle

Trail Gear Interlocking Tube Clamps – 180113-KIT

Trail Gear

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Trail Gear Interlocking Tube Clamps, part number 180113-KIT
  • Machined from 100% 4130 Chromoly
  • Listed size of 1.50 in
  • Counter sunk allen head screw

Description

Overview

Trail Gear Interlocking Tube Clamps, part number 180113-KIT, are clamps for placing a support tube across a truggy or buggy. They let you keep the support tube in place while a motor, transmission or seat is removed.

The clamps are machined from 100% 4130 Chromoly and use a counter sunk allen head screw. The listed size is 1.50 in, which is the main measurement to check against your tubing.

Key features

  • Interlocking design for removable support tubes
  • Machined from 100% 4130 Chromoly
  • Counter sunk allen head screw
  • Listed size of 1.50 in

Choosing a support tube setup

A support tube across a truggy or buggy adds stiffness to the frame and gives a fixed point for seats and drivetrain mounts. Removable clamps let you pull the motor, transmission or seat without cutting the tube, which is useful for maintenance and swaps. Choose the tube diameter first, then match the clamp size to it so the fit stays firm under load.

Plan the layout before drilling or welding anything. Check clearance around the steering, fuel lines and exhaust, and keep the tube away from parts that flex. Inspect clamp screws and the chromoly around each clamp after rough runs, since cracks or loose fasteners show up quickly under vibration. Replacing worn clamps as a set helps keep the frame balanced.

Specifications

Brand Trail Gear
Part number 180113-KIT
Material 100% 4130 Chromoly
Fastener Counter sunk allen head screw
Size 1.50 in

Vehicle fitment

They are sized for a 1.50 in tube. Confirm the tube diameter matches before ordering.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Place the support tube across the truggy or buggy, then keep it fixed while removing the motor, transmission or seat. Confirm hardware quantities and tools before starting.

What’s included

Check the individual pieces against the kit before fitting.

Questions & Answers

What material are the Trail Gear Interlocking Tube Clamps made from?

They are machined from 100% 4130 Chromoly. They use a counter sunk allen head screw and are sized at 1.50 in, offered as part number 180113-KIT.

Do these clamps fit a specific truggy or buggy model?

They are sized for a 1.50 in tube, so fit depends on the tube rather than a vehicle model. Measure your support tube and confirm the match before ordering.

What size are the interlocking tube clamps?

The size is 1.50 in. Measure your support tube's outside diameter and confirm it matches before ordering, since wall thickness and tube range are needed to judge fit.

How often should the clamp screws be checked?

Check them before each run and after rough trails, since vibration can loosen fasteners over time. Re-tighten them and inspect the chromoly around the clamp for cracks.

Can these clamps be used with a different tube size?

Only if the tube matches the clamp size. A tube that is too large or too small will not seat properly and may slip under load, so measure before choosing.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon