Overview
POR-15 Metal Prep, part number 40201, is a prep product that gives its Rust Preventive Coating strong adhesion on any metal surface, including aluminum and shiny polished steel. It is a chemical prep for metal rather than a vehicle-specific part, and it is Universal Fit.
The product etches the metal to form an anchor pattern for POR-15 Rust Preventive Coating and other coatings. It also leaves a zinc phosphate coating that helps paint and steel chemically bond. It is formulated to avoid residues that block proper adhesion, and it is not caustic, corrosive, toxic or flammable.
Key features
- Etches bare metal to create an anchor pattern for coatings
- Leaves a zinc phosphate layer for chemical bonding of paint and steel
- Suited to aluminum and shiny polished metal surfaces
- Neutralizes rust while preparing the surface
- Described by POR-15 as not caustic, corrosive, toxic or flammable
- Applied after the work piece has been thoroughly degreased
Why surface prep matters
Paint and coatings bond to the surface, not to dirt or old film. Degreasing comes first, then the prep makes the metal ready to accept the coating. Etching creates a fine texture for the coating to grip, while a conversion layer helps keep bare steel from flash rusting before the topcoat goes on. Work quickly once prepared, since a clean surface can pick up contamination from handling.
Aluminum and polished metal are harder to coat, since their smooth surfaces give little grip without preparation. Check the metal type before starting, and clean away any mill oil, buffing compound or fingerprints. Let the prepared surface dry fully before applying the primer or rust preventive coating. Recheck any spots where the surface was touched, and wipe them again if needed.
Specifications
| Brand | POR-15 |
|---|---|
| Part number | 40201 |
| UPC | 20051491402013 |
| Metal surfaces | Any metal, including aluminum and shiny polished metal |
| Surface treatment | Etch plus zinc phosphate coating |
| Safety profile (per POR-15) | Not caustic, corrosive, toxic or flammable |
| Product type | Metal prep |
Vehicle fitment
POR-15 lists Metal Prep as Universal Fit. It is a chemical prep for metal, not a part sized for a vehicle, so no year, make, model or trim applies.
Degrease the work piece first, then confirm the metal type matches the surfaces named above before applying the prep.
Installation notes
Degrease the work piece thoroughly before applying the prep. Then apply Metal Prep to neutralize any rust and etch the clean bare metal, which lets POR-15 Rust Preventive Coating or another coating adhere better.
What’s included
The part number is 40201 and the UPC is 20051491402013.









