Dana 44 Complete Assemblies
Showing 25–36 of 38 resultsSorted by popularity
-
-
-
-
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 3.73 Ratio – Open Diff – 10032861
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 3.73 Ratio – Open Diff – 10032861
- Ultimate Dana 44 front axle with 3.73 ratio and open differential
- Spicer nickel chromoly axle shafts and performance differential cover
- SPL 1350 axle shaft universal joints and improved caster for lifts
- Dana Spicer part number 10032861, 5 on 5 inch wheel bolt pattern
SKU: D/S10032861 -
-
Dana 44 Complete Assemblies
G2 JK Metric CORE 44 Rear With 4.88 ratio and Placer 35 Spline ARB Air Locker Differential – C4JMR488AP5
Dana 44 Complete AssembliesG2 JK Metric CORE 44 Rear With 4.88 ratio and Placer 35 Spline ARB Air Locker Differential – C4JMR488AP5
- JK metric CORE 44 rear axle with 4.88 ratio and ARB Air Locker
- 35 spline Placer axle shafts and factory style flange pinion yoke
- Metric Rubicon style carrier bearings and spanner nuts
- G2 Axle and Gear part number C4JMR488AP5, UPC 631410121056
SKU: G/2C4JMR488AP5 -
Dana 44 Complete Assemblies
G2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential – C4JMFS456MP5
Dana 44 Complete AssembliesG2 JK CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential – C4JMFS456MP5
- JK high pinion front axle with 4.56 ratio and Auburn Ected differential
- Standard axle caster, suited to 0-4 inch lifts
- 35 spline Placer axle shafts and heavy duty bearing caps
- G2 Axle and Gear part number C4JMFS456MP5, UPC 631410120363
SKU: G/2C4JMFS456MP5 -
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 4.88 Ratio and 35 Spline Auburn Ected Differential – C4JMFL488MP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 4.88 Ratio and 35 Spline Auburn Ected Differential – C4JMFL488MP5
- JK high pinion front axle with 4.88 ratio and Auburn Ected differential
- 8.8-inch JK 44 ring and pinion with larger pinion shaft
- 35 spline Placer axle shafts and 3 degrees of extra caster
- G2 Axle and Gear part number C4JMFL488MP5, UPC 631410120462
SKU: G/2C4JMFL488MP5 -
Dana 44 Complete Assemblies
G2 JK CORE 44 High Pinion Front Axle With 5.38 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL538AP5
Dana 44 Complete AssembliesG2 JK CORE 44 High Pinion Front Axle With 5.38 Ratio and 35 Spline ARB Air Locker Differential – C4JMFL538AP5
- JK high pinion front axle with 5.38 ratio and ARB Air Locker
- Metric-style Rubicon carrier bearings and 35 spline Placer axle shafts
- Extra caster for lifts of 6 inches and up
- G2 Axle and Gear part number C4JMFL538AP5, UPC 631410120493
SKU: G/2C4JMFL538AP5 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.88 Ratio – 10010521
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.88 Ratio – 10010521
- Dana Spicer Ultimate Dana 44 front axle with 4.88 gears
- Selectable electronic locking differential, harness sold separately
- Improved caster and pinion angle for lifted Jeeps
- Dana Spicer part number 10010521, UPC 23913483722
SKU: D/S10010521 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.56 Ratio – 10010520
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 4.56 Ratio – 10010520
- Dana Spicer Ultimate Dana 44 front axle with 4.56 gears
- Factory electric locker and Spicer chromoly axle shafts
- SPL 1350 u-joints with triple lip seals
- Dana Spicer part number 10010520, UPC 23913483715
SKU: D/S10010520 -
Dana 44 Complete Assemblies
Dana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.13 Ratio – 10010522
Dana 44 Complete AssembliesDana Spicer Jeep JK Ultimate Dana 44 Front Axle Assembly 5.13 Ratio – 10010522
- Dana Spicer Ultimate Dana 44 front axle assembly with 5.13 gears
- Selectable electronic locker, harness sold separately
- 5/16 inch thick axle tubes, Spicer chromoly axle shafts
- Dana Spicer part number 10010522, UPC 23913483739
SKU: D/S10010522
What a complete assembly is
A complete Dana 44 assembly is a fully built axle: housing, ring and pinion, carrier or differential, axle shafts, brackets and usually the cover. It saves the labor of building an axle from parts and setting up gears. Builders often use these when upgrading from a lighter factory axle on a Jeep, or when swapping a rear axle for a stronger design.
Choosing one
Start with the application. The sample products here are largely Jeep JK units, and they are sold front or rear. Housing brackets, spring perches, control arm mounts and track bar positions are vehicle-specific, so an assembly for one chassis will not bolt up to another without modification. Pick by position, intended lift height and tire size.
- Gear ratio: Taller tires call for numerically higher ratios, such as 4.88, 5.13 or 5.38, to bring back acceleration and keep the engine in its power band. The front and rear must match each other.
- Locker or limited slip: Options include air lockers, electric lockers and automatic lockers. Each has different control, cost and street manners.
- Spline count and axle shafts: More splines and larger shafts add strength but may need matching hubs and joints.
Specs to compare
Look at tube wall thickness, axle shaft material, the U-joint series, and whether the housing has extra caster built in for taller lifts. Check track width so the wheels sit where your fenders and wheel offset allow. Note whether the assembly includes brakes or a disc brake kit, and whether it is the standard or metric version where the listing says so. A replacement housing alone, as one listing here shows, is not the same as a complete axle.
Installation and compatibility
Swapping an axle is a major job that involves suspension, steering, brake lines, driveshafts and sometimes ABS sensors. Brake and steering systems are safety items, so professional installation and alignment are strongly recommended, along with torque to specification on every bolt. Fill with the gear oil the manufacturer specifies, and break in new gears carefully with gentle driving and an early fluid change.
You may need new drive shafts, a different track bar, and updated brake lines. Confirm fitment for your exact year, make, model and trim, and read the manufacturer's specifications. Verify that the axle's ratio matches the other axle and your tire size before ordering.
Planning a swap and common mistakes
Before buying, make a full plan. Check the width of the axle against your fender clearance and wheel offset, the bolt pattern of the hubs, and whether your wheels and brake rotors will carry over. Find out whether your steering linkage, track bar and drive shafts must change. Some builders also need a transmission or transfer case upgrade to take advantage of a stronger axle, though that is a separate decision.
Common mistakes include forgetting the cost of ancillary parts, mismatching gear ratios, and neglecting the pinion angle. Pinion angle should point the yoke toward the transfer case or transmission within the range that the drive shaft joints can handle. Skipping the alignment after a swap leads to uneven tire wear and poor handling.
After the swap, check fluid levels, torque on bolts and the gear mesh pattern if gears were adjusted. Change the gear oil after the first few hundred miles to remove break-in wear metal. Listen for whine or clunks, and check axle breather lines so they are routed up high.
Popular Dana 44 Complete Assemblies brands
Dana 44 Complete Assemblies FAQ
Why must front and rear gear ratios match?
Both axles must turn at the same relative speed in four-wheel drive. Mismatched ratios cause binding and driveline wear. When regearing or swapping an axle, use the same ratio at both ends.
What gear ratio should I choose for bigger tires?
Larger tires lower the effective ratio, so a numerically higher ratio helps restore performance. The right number depends on tire size, engine and transmission. Gear ratio calculators and the manufacturer's recommendations can guide you.
Is a Dana 44 complete assembly a bolt-in swap?
Usually not fully. Brackets are chassis-specific, and you may need drive shafts, brake lines or alignment work. Check what the listing covers and have the swap done carefully, preferably by a professional.
What is the difference between air and electric lockers?
Both lock the differential on command. Air lockers use an onboard compressor and air line, while electric lockers use a wiring and switch. Each has its own installation needs, so check what comes with the axle.



