Overview
The Dana Spicer 10010521 is an Ultimate Dana 44 front axle with a 4.88 ratio, sized for 2007-2018 Jeep Wrangler JK models. It is a direct bolt-in front axle that keeps the stock wheel ends.
Caster and pinion angle are improved for lifted Jeeps, and the axle has an increased gross axle weight rating. It uses 4.88 Genuine Spicer gears with a selectable electronic locking differential.
The Ultimate Dana 44 is engineered for on-trail durability and strength. It is a direct bolt-in front axle that keeps the stock wheel ends, and it carries an increased gross axle weight rating.
Spicer chromoly axle shafts and Spicer Life Series 1350 u-joints with triple lip seals and full-circle clips are fitted, and the performance differential cover uses a Spicer performance gasket. Dana recommends military tested and approved 75W-140 synthetic for the gear oil.
Key features
- 4.88 Genuine Spicer gears
- Selectable electronic locking differential, harness sold separately
- Improved caster and pinion angle for lifted Jeeps
- Increased gross axle weight rating
- Spicer chromoly axle shafts
- Redesigned and thicker brackets on 5/16 inch thick axle tubes
Lift height and steering geometry
A front axle is not only a set of gears; it also sets how the steering and suspension geometry work. When a Jeep is lifted, the axle moves relative to the frame and the caster and pinion angles shift. Improved caster and pinion settings help the driveline run smoothly, but the angles still need checking after any lift change.
After fitting a front axle, measure the caster and pinion angle with the vehicle at its normal ride height. Look at the steering stops, track bar length and drag link angle, since these parts often need adjustment together. Re-check the setup after a lift, a tire upgrade or a suspension change, and keep a note of the readings so future work starts from known numbers.
- Measure caster and pinion angle at ride height
- Check track bar and drag link alignment
- Re-check after changing lift or tire size
- Keep a log of alignment readings
Specifications
| Brand | Dana Spicer |
|---|---|
| Part number | 10010521 |
| UPC | 23913483722 |
| Position | Front |
| Housing | 07-up Jeep JK Dana 44 |
| Gear ratio | 4.88 |
| Traction | Selectable electronic locking differential |
| Brakes | Reuse factory |
| Fitment type | Direct fit |
Vehicle fitment
This axle fits the 2007-2018 Jeep Wrangler JK in the front position, with a direct fit to the factory mounting points.
It is not made for the rear axle or for the Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The electronic locker needs its harness, part number D/S10021771, which is sold separately. Lift height affects the caster and pinion setup, so check both after the swap.
What’s included
The axle with its Spicer chromoly shafts and performance differential cover.
Not included: the locker harness and gear lube.











