Rear Bumpers
Showing 301–312 of 340 resultsSorted by popularity
-
Rear Bumpers
Smittybilt Classic Rock Crawler Rear Bumper (Black) – 76750
- Classic Rock Crawler rear bumper with sloping ends
- Heavy duty 1/4 inch steel plate design
- Dense zinc undercoat with dual stage textured powder coat
- Robotically welded, no D-rings included
- Available in textured black only
SKU: S/B76750 -
Rear Bumpers
Go Rhino BR20 Rear Replacement Bumper (Black) – 28219T
- Go Rhino BR20 rear replacement bumper, part 28219T, textured black
- Integrated D-shackle mounts; shackles not included
- Integrated steps for easier access to the truck bed
- Provisions for license plate lights, trailer light plug and reverse sensor
- Fitment not listed; confirm vehicle year, model and trim
SKU: ORP28219T -
Rear Bumpers
Smittybilt Classic Rock Crawler Rear Bumper and Tire Carrier with Receiver Hitch (Black) – 76651
Rear BumpersSmittybilt Classic Rock Crawler Rear Bumper and Tire Carrier with Receiver Hitch (Black) – 76651
- Rear bumper and tire carrier with receiver hitch, 76651
- Moves oversized tire weight off the tailgate
- Three point mounting; 1/4″ steel plate
- Textured black, 5 year limited warranty
SKU: S/B76651 -
-
Rear Bumpers
Smittybilt M1 Ford Rear Bumper with D-ring Mounts and Additional Rear Lights Included (Black) – 614830
Rear BumpersSmittybilt M1 Ford Rear Bumper with D-ring Mounts and Additional Rear Lights Included (Black) – 614830
- M1 rear bumper for Ford trucks with D-ring mounts and rear lights
- Built from 3/16 inch and 1/4 inch cold roll steel
- Solid mount D-rings welded inside and out, 7/8 inch
- Completely bolts on with no drilling
- Two stage matte black powder coat, 5-year limited warranty
SKU: S/B614830 -
-
Rear Bumpers
Smittybilt SRC Classic Rock Crawler Rear Bumper with 2’ receiver and D-rings (Black) – 76750D
Rear BumpersSmittybilt SRC Classic Rock Crawler Rear Bumper with 2’ receiver and D-rings (Black) – 76750D
- SRC Classic Rock Crawler rear bumper with 2-inch receiver and D-rings
- Two stage matte black powder coat over 3/16 inch cold rolled steel plate
- Bolts directly to the vehicle with no drilling
- Winch mount version rated for a 10,000 lb winch
- 5-year limited warranty
SKU: S/B76750D -
-
-
-
Rear Bumpers
Fab Fours Ranch Rear Bumper (Black) – FF09-T1750-1
- Gloss black powder coat (-1) or bare steel (-B)
- Pipe and tread plate combination construction
- Back-up lights included
- Pre-drilled sensor holes
- Retains the OEM receiver hitch and wiring locations
- 100 percent made in the USA
SKU: FFIFF09-T1750-1
What a rear bumper adds
A stock rear bumper is mostly cosmetic and impact cover. An aftermarket bumper adds a stronger structure and usually useful hardware: recovery shackle tabs, a receiver for towing, a mount for lights or a spare tire carrier, and better clearance at the back corners. Trimmed corners improve the departure angle on steep exits, which matters on trail rigs and lifted trucks.
Materials and construction
- Plate steel: strong and common on Jeep bumpers. It is heavy, so allow for added weight on the rear suspension.
- Tubular or pipe-and-tread-plate designs: a classic truck look, with a step surface in some styles.
- Aluminum: much lighter, with lower corrosion risk. It is not as strong as steel at the same thickness, so check the wall thickness in the product listing.
Finishes include black powder coat and bare steel. Bare steel needs a coat of paint before use, and any finish will chip on the trail and benefit from touch-ups.
Features to compare
- Hitch receiver: check the size and the towing rating of the receiver and whether the bumper is rated for towing at all.
- Shackle mounts: look for thick tabs sized for the shackles you plan to use. Never use a tow hook or tab as a lifting point.
- Sensor cutouts: newer trucks with parking sensors may need a bumper made to accept them, as some listings state.
- Tire carrier: some Jeep bumpers-bumpers-tire-carriers-winch-mounts-2 include or accept a swing-out carrier. A mounted tire adds a lot of load, so check the rated capacity.
- License plate and lighting: many bumpers-bumpers-tire-carriers-winch-mounts-2 include plate and light provisions. Lighting and plate rules vary by state, so check local regulations.
Fitment
Rear bumpers-bumpers-tire-carriers-winch-mounts-2 are model specific. The listing may specify a vehicle generation, such as a range of Wrangler years or a particular Ford truck generation, and may be limited by whether the bumper has a tire carrier mount. Confirm fitment for your exact year, make and model, and check the manufacturer's specifications for weight and hardware.
Installation notes
Expect to remove the factory bumper and sometimes the hitch, wiring and sensors. Rear bumpers-bumpers-tire-carriers-winch-mounts-2 can weigh well over 50 pounds, so use a jack or a helper to hold the part. Tighten bolts to the specified torque, and have a shop install it if you are not comfortable working under the vehicle. Recheck the bolts after the first drive and after rough trail use.
Choosing for your use and avoiding mistakes
A daily-driven truck, a weekend trail Jeep and a heavy overland rig each ask different things of a rear bumper. If the vehicle tows regularly, weigh the receiver rating and tongue clearance first. If it climbs rocks, the shape of the corners and the height of the lower edge matter more than looks.
- Account for the weight. A bumper plus a tire carrier, jerry can mounts and lights can add a large load behind the axle. Consider heavier rear springs or shocks if the rear sits low afterward.
- Check clearance for the spare and the tailgate. A swing-out carrier needs room to open, and some tailgates will not clear a hitch receiver when open.
- Plan the wiring. If your vehicle has a tow connector, backup sensors or a third brake light, verify how those will be routed or relocated.
- Inspect the welds and the hardware. After trail use, look for cracked welds, stretched bolt holes and loose fasteners, and keep the exposed steel coated.
Popular Rear Bumpers brands
- Fab Fours (79)
- Smittybilt (51)
- Addictive Desert Designs (28)
- Poison Spyder Customs (26)
- Ranch Hand (21)
- Nfab (17)
- Rampage (15)
- ARB 4x4 Accessories (14)
- Body Armor 4x4 (12)
- Warn (11)
- Westin (11)
- Bestop (9)
Rear Bumpers FAQ
Do aftermarket rear bumpers include a hitch?
Many include a receiver or accept a hitch, but not all do. Check the listing for receiver size and the towing rating. Some designs are intended only for trail protection and recovery points.
Will a heavy rear bumper affect my suspension?
Steel bumpers add weight behind the axle, which can cause the rear to sit lower, especially with a tire carrier. Springs or shocks with higher ratings may be needed, so check the weight in the listing.
Are steel or aluminum bumpers better?
Neither is better in every case. Steel is stronger for the money and heavier, while aluminum is much lighter and resists rust but can cost more. Choose based on weight tolerance and intended use.
Can I use the shackle mounts for recovery?
Shackle tabs are made for recovery, but follow the rated capacity of the shackle and the bumper and use soft, correctly rated gear. Never exceed ratings or use them as a lifting point.








