Overview
The Smittybilt SRC Classic Rock Crawler rear bumper with 2-inch receiver and D-rings (part number S/B76750D) is a black rear bumper made from 3/16 inch cold rolled steel plate. The steel plate is designed for protection, and D-rings are available.
The bumper bolts directly to the vehicle and needs no drilling or modifications. The Wrangler version is offered with or without a winch mount rated for a 10,000 lb winch.
Key features
- 2-inch receiver hitch
- D-ring mounts
- 3/16 inch cold rolled steel plate
- Bolts directly to the vehicle
- No drilling or modifications required
- Two stage matte black powder coat
- Winch mount option rated for a 10,000 lb winch
Winch mounts and recovery gear
A winch mount carries the pulling load into the bumper and its attachment points, so the rating matters. Pulls at an angle put side loads on the mount and the bolts, which is why straight-line pulls are easier on the hardware. Use a recovery line or a rated shackle that matches the winch and the mount, and avoid shock loading the system by jerking the vehicle free.
Winch mounts and bumper bolts should be checked after heavy pulls and hard trail use. Look for cracks in the welds, loose hardware, and any movement of the bumper relative to the frame. Keep the winch cable, hook and fairlead in good shape, since a worn cable can fail under load.
- Pull straight when possible
- Check mount bolts after heavy pulls
- Use shackles rated for the winch load
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | S/B76750D |
| Position | Rear |
| Material | 3/16 inch cold rolled steel plate |
| Finish | Two stage matte black powder coat |
| Receiver | 2 inch |
| Mounting | Bolts directly, no drilling |
| Warranty | 5-year limited |
| Fitment | Direct fit |
Vehicle fitment
The bumper is made for the Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering.
No model year is given for this bumper. Ask the manufacturer for the exact model years before ordering.
Installation notes
The bumper bolts directly to the vehicle with no drilling or modifications. The winch mount is a separate version choice, so confirm which version you want before ordering.
What’s included
The rear bumper with receiver and D-rings, in the black two stage powder coat finish.






















