Overview
The Go Rhino BR20 rear replacement bumper, part number 28219T, is a textured black powder coat replacement for the rear of a truck. Its integrated steps make the truck bed easier to reach, and it adds provisions for LED lights, D-shackle mounts and a reverse sensor port.
The BR20 is a replacement bumper for the rear of a truck, not an add-on. Confirm the year, make, model and trim match your truck before choosing it.
Key features
- Integrated steps for easier access to the truck bed
- Integrated D-shackle mounts, shackles not included
- Provisions for license plate lights and a trailer light plug
- Port for access to the spare tire crank
- Reverse sensor mounting port
- Optional Rear Light Plate accessory for Rigid D-Series Dually or compatible LED lights
Replacing a rear bumper
A replacement bumper takes the place of the original unit, so the work is mostly about fit at the mounting points and the wiring routing. Before removing the old bumper, photograph the wiring, note the hardware positions, and keep the fasteners sorted so reassembly goes smoothly.
Lighting and sensor provisions are easier to set up before the bumper is fully mounted. Route trailer and license plate wiring through the provisions, and make sure any reverse sensor cable reaches its port without strain. Fused circuits protect the vehicle’s electrical system if a short occurs.
Many owners replace the trailer wiring harness, the reverse sensor kit or the spare tire crank access along with the bumper, so check those parts before reinstalling. Check the bumper for cracks at the mounts after the first trail runs and retorque the bolts once the bumper settles.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | 28219T |
| UPC | 887753087140 |
| Finish | Textured black powder coat |
| Position | Rear |
| D-ring mount | Included |
| Receiver hitch | No |
| Tire carrier | No |
Vehicle fitment
Match the year, make, model and trim to your truck before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route license plate light and trailer light wiring through the provisions before final mounting, and confirm the reverse sensor port matches your sensor kit.
What’s included
The rear bumper with its integrated D-ring mount.
Not included: D-shackles, the optional Rear Light Plate accessory, and LED lights or trailer wiring.









