Overview
The Smittybilt M1A2 Modular Front Bumper, part number S/B612933, is a full-width front bumper for the 2015–2020 Ford F-150. It is a heavy-duty modular bumper made from 1/8 inch steel, with lower panels that can be removed and a 21-inch LED center light bar that mounts above the bumper.
The modular design lets the winch and winch plate be removed without taking the bumper off the truck. The main light bar can then be installed inside the winch cavity. The bumper is winch compatible and includes D-ring mounts.
Key features
- Modular design with a winch that can be removed without taking off the bumper
- Removable lower panels for better approach angles and tire clearance
- 21-inch LED center light bar that can mount above the bumper
- Main light bar that can be installed inside the winch cavity
- Light mounts included
Winch and light bar setup
A modular front bumper gives you more options over time. Because the winch and winch plate come off without removing the bumper, you can run the bumper bare for daily driving and add the winch later. Before reinstalling, check the plate bolts, winch cable and wiring connectors, since a loose connector is easy to miss when parts are swapped.
The 21-inch LED center light bar can mount above the bumper or in the winch cavity, so plan the wire routing before fitting anything. Keep the light bar aimed at the lane you drive, and check the mounts after rough trails, because vibration can knock the aim out over time. Removable lower panels should be checked for loose fasteners each time they come off.
- Inspect lower panel fasteners after off-road use
- Keep wiring away from moving suspension parts
- Keep the winch plate hardware together in one place
Specifications
| Brand | Smittybilt |
|---|---|
| Model | M1A2 Modular Front Bumper |
| Part number | S/B612933 |
| Position | Front |
| Width | Full |
| Material | Steel, 1/8 inch |
| Finish | Powder coat |
| Winch mount | Compatible |
| D-ring mounts | Included |
| Light mounts | Included |
| Center light bar | 21-inch LED |
| Hoop | Not included |
| Stinger | Not included |
| Receiver hitch | Not included |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2015–2020 Ford F-150.
The list does not include the F-150 from 2021 on, or the F-250 and F-350 Super Duty. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lower panels come off for better approach angles and tire clearance, and the winch and plate can be swapped without removing the bumper.
What’s included
The M1A2 modular front bumper with its D-ring mounts and light mounts. The 21-inch LED center light bar is part of the modular setup. The main light bar can also be installed inside the winch cavity once the winch and plate are removed.
Not included: A hoop, a stinger and a receiver hitch are not included.























