Select your vehicle

Rugged Ridge XHD Front Bumper Kit, Stinger/Standard (Black) – 11540.59

Rugged Ridge

Shop Jeep Wrangler TJ Bumpers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 1976–1986 Jeep CJ5 and CJ7, 1981–1985 Scrambler, and 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wrangler
  • XHD front winch mount bumper kit with stinger and standard bumper ends
  • 4mm thick steel with factory fog light cut outs
  • D-ring mounts and light mounts included
  • Part number RUG11540.59

Description

Overview

The Rugged Ridge XHD Front Bumper Kit, Stinger/Standard, part number RUG11540.59, is a black powder-coated front bumper kit for Jeep CJ and Wrangler models. It fits the 1976–1983 CJ5, 1976–1986 CJ7, 1981–1985 Scrambler, 1987–1995 Wrangler (YJ), 1997–2006 Wrangler (TJ) and 2004–2006 Wrangler (LJ).

The kit is the XHD front winch mount bumper with its stinger bar and standard bumper ends. The parts can be set up in the configuration you prefer. It is made from 4mm thick steel with factory fog light cut outs. The XHD system is covered by patent numbers 7,703,834; 8,393,656; and 8,764,080.

Key features

  • XHD front winch mount bumper, D-ring mounts and standard bumper ends
  • Stinger bar included
  • 4mm thick steel construction
  • Factory fog light cut outs
  • Powder coat finish that Rugged Ridge says gives years of heavy-duty use

Bumper setup and mounting

A front winch bumper changes the weight and the balance of the front end, so it works best alongside suitable suspension and steering components. Before choosing a winch, confirm the mounting plate, cable path and fairlead position, since these determine how cleanly the winch sits behind the bumper. The stinger bar and D-ring mounts give recovery points, but they should be used with rated straps and shackles.

Front bumpers are often replaced with a winch-mount setup when the stock bumper is removed, so check the headlight, grille and radiator clearance with the new bumper in place. Powder coat protects the steel, but chips should be touched up promptly to slow rust. Inspect the bolts and brackets after rough trail use and re-tighten them to the torque the hardware calls for.

  • Check winch and fairlead alignment before the first trip
  • Touch up chips in the powder coat promptly
  • Inspect D-ring mounts after recovery use

Specifications

Brand Rugged Ridge
Part number RUG11540.59
Position Front
Width Full
Material Steel, 4mm thick
Finish Powder coat, black
Winch mount Compatible
D-ring mounts Included
Light mounts Included
Patent numbers 7,703,834; 8,393,656; 8,764,080
Fitment type Direct fit

Vehicle fitment

It fits the 1976–1983 Jeep CJ5, the 1976–1986 CJ7, the 1981–1985 Scrambler, the 1987–1995 Wrangler (YJ), the 1997–2006 Wrangler (TJ) and the 2004–2006 Wrangler (LJ).

The list does not include the Wrangler JK or JL or any Wrangler model year after 2006. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The XHD front winch mount bumper, D-rings, stinger bar and standard bumper ends, as the product name states.

Fitment

VehicleYearsTrims
Jeep CJ51976–1983Base, Golden Eagle, Laredo, Limited, Renegade
Jeep CJ71976–1986Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade
Jeep Scrambler1981–1985Base, Laredo, Renegade, SL, SR
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X
Jeep Wrangler (YJ)1987–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Rugged Ridge RUG11540.59 kit include a stinger?

Yes. The kit includes the stinger bar along with the XHD front winch mount bumper, D-rings and standard bumper ends.

Will this kit fit a 1990 Jeep Wrangler YJ?

Yes. It fits the 1987–1995 Wrangler (YJ), so a 1990 model falls within that range. Confirm the year, model and trim match your vehicle before ordering.

Does the kit have fog light cut outs?

Yes. It has factory fog light cut outs and is made from 4mm thick steel. The black powder coat finish is intended for heavy-duty use.

Can a winch be added after installing the bumper?

Often yes, but it depends on the winch's size and the mounting plate. Check the cable path, fairlead position and clearance to the grille before mounting the winch to the bumper.

How do I keep the powder coat from rusting?

Touch up chips and scratches with a matching coating soon after they appear, and wash off road salt and mud. Inspect the seams and welds periodically for surface rust.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Bumpers on Amazon