Jeep Wrangler (TJ) Front Bumpers
26 front bumpers listed for the 1997–2006 Jeep Wrangler (TJ)
Every part on this page is listed by its maker for this model; the most represented brands are Rugged Ridge, Smittybilt and Poison Spyder Customs. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 26 resultsSorted by popularity
-
Bumpers
Smittybilt Tubular Jeep Front Bumper (Stainless Steel) – JB44-FNS
- Fits 1976–1983 CJ5, 1976–1986 CJ7, 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ
- One-piece tubular front bumper in stainless steel finish
- Pre-cut vertical uprights; robotically welded
- Full width; light mounts not included
- Part number S/BJB44-FNS
SKU: S/BJB44-FNS -
Bumpers
Smittybilt Tubular Jeep Front Bumper (Black) – JB44-FN
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7, 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ
- One-piece tubular front bumper with pre-cut vertical uprights
- Robotically welded construction
- Full width; light mounts included; D-ring mounts not included
- Part number S/BJB44-FN
SKU: S/BJB44-FN -
Bumpers
Rugged Ridge XHD Front Bumper Kit, Stinger/Standard (Black) – 11540.59
- Fits 1976–1986 Jeep CJ5 and CJ7, 1981–1985 Scrambler, and 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wrangler
- XHD front winch mount bumper kit with stinger and standard bumper ends
- 4mm thick steel with factory fog light cut outs
- D-ring mounts and light mounts included
- Part number RUG11540.59
SKU: RUG11540.59 -
Bumpers
Rugged Ridge Short Base Winch Mount Front Bumper Center Section (Black) – 11540.40
- Fits 1976–1986 Jeep CJ5 and CJ7, 1981–1985 Scrambler, and 1987–1995 YJ, 1997–2006 TJ and 2004–2006 LJ Wrangler
- Stubby center section of the XHD modular front bumper, black powder coat
- Winch mount compatible, with D-ring mounting brackets included
- Light mounts not included
- Part number RUG11540.40
SKU: RUG11540.40 -
Bumpers
Hyline Offroad Standard Front Bumper (Black) – 250.100.110
- 60-inch full-width steel front bumper for Jeep Wrangler YJ, TJ and LJ
- Winch mount compatible, with D-ring mounts welded front and back
- Bolt-on installation with no drilling required
- Part number HYL250.100.110, powder coated black
SKU: HYL250.100.110 -
-
-
Front Bumpers
Rugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Stainless Steel) – 11563.03
Front BumpersRugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Stainless Steel) – 11563.03
- Stainless steel dual tube front winch bumper with center hoop
- Cut-out for winch mounting; winch plate not included
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ
- Welded end caps, limited lifetime warranty
SKU: RUG11563.03 -
Front Bumpers
Rugged Ridge Dual Tube Front Winch Bumper with Center Hoop (Black) – 11561.03
- Textured black dual tube front winch bumper with center hoop
- Cut-out for winch mounting; winch plate not included
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ models
- Welded end caps, limited lifetime warranty
SKU: RUG11561.03 -
Front Bumpers
Rugged Ridge 3 Inch Dual Tube Front Bumper with Center Hoop (Black) – 11560.01
- 3 inch dual tube front bumper with center hoop in high gloss black, non-winch style
- Fits CJ5, CJ7, Scrambler and Wrangler YJ, TJ and LJ
- Smooth ground welds and welded end caps
- Limited lifetime warranty
SKU: RUG11560.01 -
Front Bumpers
Rugged Ridge Double X Striker for Front Modular Bumper (Black) – 11540.25
- Double X Striker for the XHD front modular bumper in textured black
- Made from .120 wall tubing, bumper not included
- Made for CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK
- Mounting tabs accept 3/4 inch D-ring shackles
SKU: RUG11540.25 -
Front Bumpers
Rugged Ridge Stinger Over-rider for Modular Front Bumper (Black) – 11540.13
- Textured black stinger over-rider for the XHD modular front bumper, 2 inch tubing
- Fits XHD front bumpers 11540.10 and 11540.11
- Made for Jeep Wrangler YJ, TJ, LJ and JK
- Provides grille protection, bolt-on modular design
SKU: RUG11540.13 -
Front Bumpers
Rugged Ridge Front Stainless Steel Tube Bumper with Hoop (Stainless Steel) – 11520.01
- 3 inch double tube front bumper with over-rider hoop in polished 304 stainless steel
- Fits Jeep CJ, Scrambler and 1987–2006 Wrangler models
- Welded end caps, bolt-on installation with no drilling
- No winch, light or D-ring mounts
SKU: RUG11520.01 -
-
Front Bumpers
Rock Hard 4X4 Parts Extreme Duty Winch Mount Front Bumper with Grill Guard (Black) – RH4010
Front BumpersRock Hard 4X4 Parts Extreme Duty Winch Mount Front Bumper with Grill Guard (Black) – RH4010
- Extreme Duty full-width winch bumper with grille guard for classic Jeeps
- 1/4 inch CNC laser cut and bent steel, black powder coat
- Winch mounted low in the bumper without affecting airflow
- Light tabs and D-ring mount included; must reuse factory hardware
SKU: RFPRH-4010 -
-
-
-
Front Bumpers
JcrOffroad Vanguard Full Width Front Winch Bumper (Black) – SWBFVTJ-T-P
- Vanguard full-width front winch bumper for the 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Unlimited (LJ)
- Integrated grill hoop, 3/16 inch black powder-coated steel
- Accepts aftermarket 3×3 cube LED lights
- Recessed winch mount
SKU: JCRSWBFVTJ-T-P -
Front Bumpers
JcrOffroad Crusader Mid Width Front Winch Bumper (Black) – SWBFCTJ-T-P
- Crusader mid-width front winch bumper for the 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Wrangler Unlimited (LJ)
- 3/16 inch black powder-coated steel with recessed winch mount
- Accepts aftermarket 3×3 cube LED lights
- Includes two 3/4 inch thick shackle tabs
SKU: JCRSWBFCTJ-T-P -
Front Bumpers
ARB Black Jeep TJ Wrangler Deluxe Bull Bar Winch Mount Front Bumper (Black) – 3450070
- For the 1997–2006 Jeep Wrangler (TJ), per the product name
- Gloss black powder-coated steel bull bar
- Integrated winch mount with all hardware
- Mounting points for lights, clevis and D-rings
SKU: ARB3450070 -
Front Bumpers
Smittybilt XRC Front and Rear Bumper with Tire Carrier (Black) – TJSPECIAL02
- Smittybilt XRC front and rear bumper with tire carrier, part TJSPECIAL02, for 1997-2006 Jeep Wrangler TJ and LJ
- Textured matte black powder coat; 3/16-inch cold rolled steel
- Carrier takes up to a 37-inch tire; winch up to 10,000 lb
- 3rd brake light bracket, gas can mount and jack mount included
SKU: ADDTJSPECIAL02 -
Front Bumpers
Body Armor Jeep Wrangler Formed Front Bumper with Grill Guard and Winch Mount (Textured) – TJ-19531
Front BumpersBody Armor Jeep Wrangler Formed Front Bumper with Grill Guard and Winch Mount (Textured) – TJ-19531
- Body Armor 4×4 TJ-19531 front bumper for the Jeep Wrangler TJ and YJ
- 1/4-inch integrated winch plate and bolt-on grille guard hoop
- Steering box skid plate and integrated shackles included
- Bolt-on; no drilling required
SKU: B/ATJ-19531 -
Front Bumpers
Trail Gear Rock Defense Jeep Front Bumper (Bare) – 303141-2-KIT
- Fits 1987-2006 Jeep Wrangler YJ and TJ (listed years)
- 1/4 inch bare steel, brake-formed, stubby width
- Winch plate pre-drilled for most 5000-10000 model winches
- Bolt-on; includes fairlead mount hardware and D-ring recovery points
SKU: TGI303141-2-KIT




















