Ford Bronco Front Bumpers
26 front bumpers listed for the 1966–2026 Ford Bronco
Every part on this page is listed by its maker for this model; the most represented brands are Fab Fours, DV8 Offroad and Addictive Desert Designs. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 26 resultsSorted by popularity
-
-
-
-
Bumpers
Fab Fours Stubby Front Winch Bumper with Pre-Runner Guard (Black) – FB21-B5252-1
- Fits 2021–2026 Ford Bronco, two-door and four-door
- Stubby front winch bumper with pre-runner guard
- Holds up to six LED pods, or two pods and four 5.5-inch round lights
- Matte black 3/16 inch US steel
SKU: FFIFB21-B5252-1 -
Bumpers
Fab Fours Stubby Front Winch Bumper with No Guard (Black) – FB21-B5251-1
- Fits 2021–2026 Ford Bronco, two-door and four-door
- Stubby front design built to hold a WARN Zeon 12 or lower winch
- Holds up to six LED pods, or two pods and four 5.5-inch round lights
- 3/16 inch US steel, made in the USA; no guard version
SKU: FFIFB21-B5251-1 -
Bumpers
Fab Fours Matrix Series Front Bumper with Pre-Runner Guard (Black) – FB21-X5252-1
- Fab Fours Matrix Series pre-runner guard front bumper, matte black steel, part number FFIFB21-X5252-1
- Fits 2021–2026 Ford Bronco trucks
- Hoop and D-ring mounts included, winch mount compatible
- Ready for a 20-inch single-row light bar and four 3×3 LED cubes
SKU: FFIFB21-X5252-1 -
Bumpers
Fab Fours Matrix Series Front Bumper with No Guard (Black) – FB21-X5251-1
- Fab Fours Matrix Series front bumper with no guard, matte black steel, part number FFIFB21-X5251-1
- It fits 2021–2026 Ford Bronco trucks
- Winch mount compatible, ready for a 20-inch single-row light bar and four 3×3 LED cubes
- Hoop not included; full width, direct fit
SKU: FFIFB21-X5251-1 -
Bumpers
Fab Fours Matrix Series Front Bumper with Full Guard (Black) – FB21-X5250-1
- Fab Fours Matrix Series full guard front bumper, matte black steel, part number FFIFB21-X5250-1
- Fits 2021–2026 Ford Bronco trucks
- Ready for a 20-inch single-row light bar and four 3×3 LED cube lights
- Fits a WARN VR EVO 10 or smaller winch
SKU: FFIFB21-X5250-1 -
-
Bumpers
DV8 Offroad MTO (Made to Overland) Series Front Bumper – FBBR-01
- Full-width, winch-ready front bumper
- Winch mount inside the bumper, up to 12,000 lb
- 3-inch pod light mount on each side
- Paintable mesh inserts
- Light brackets for a single row 20-inch light bar
- Optional bull bar for a 13-inch LED light bar
SKU: DV8FBBR-01 -
Bumpers
DV8 Offroad FS-15 Series Winch-Ready Mid-Width Front Bumper – FBBR-02
- Mid width with optional modular wings for full width
- Winch mount compatible, up to 12,000 lb
- Center mount for a 20-inch dual row light bar or six pod lights
- Light mounts that take a 13-inch light bar above or below the bull bar
- Two recovery mounts for 3/4 inch D-rings
- Retains the factory parking sensors
SKU: DV8FBBR-02 -
-
Bumpers
ARB Summit Winch Front Bumper – 3480010
- Full-width bumper that replaces the factory front bumper
- Compatible with winches up to 10,000 lb
- Twin jack points and rated recovery points
- Accommodates adaptive cruise control and parking sensors
- Light mounts and D-ring mount included
- Includes hoop
SKU: ARB3480010 -
Bumpers
Addictive Desert Designs Rock Fighter Front Skid Plate – AC23005NA03
- Fits the 2021–2026 Ford Bronco
- Replaces the stock plastic front skid plate
- Steel construction with powder coat finish
- Covers the whole front underbelly of the vehicle
- D-ring and light mounts are not included
SKU: ADSAC23005NA03 -
Bumpers
Addictive Desert Designs Rock Fighter Front Bumper with Light Mounts and Sensor Cutouts – F230181060103
BumpersAddictive Desert Designs Rock Fighter Front Bumper with Light Mounts and Sensor Cutouts – F230181060103
- Designed for the 2021–2026 Ford Bronco
- Low profile top hoop and standard winch mount
- Center light mount for a 20-inch radius bar or 5 cube lights
- Two round light mounts on top, on either side of the hoop
- Vented skid plate with louvers for intercooler airflow
SKU: ADSF230181060103 -
Bumpers
Addictive Desert Designs Bronco Stealth Fighter Front Bumper – F230142210103
- Front bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Inset mounts for a 30-inch radius light bar or 8 cube lights in the center
- Two more inset cube light mounts toward the ends
- Louvered bottom panel for intercooler airflow
- Optional 3/16-inch aluminum skid plate; plugs supplied for models without parking sensors
SKU: ADSF230142210103 -
Bumpers
Addictive Desert Designs Bomber Front Bumper with Rigid Light Mounts – F230194130103
- Front bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Center panel with three mounting points for Rigid 360 6-inch lights
- Cube light mounts on both sides, framed by satin black aluminum
- Two reinforced clevis mounts for 3/4-inch D-rings
- Optional 3/16-inch vented aluminum skid plate
SKU: ADSF230194130103 -
Bumpers
Addictive Desert Designs Bomber Front Bumper with Baja Designs Light Mounts – F230194120103
- Front bumper for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Center panel with three mounting points for Baja Designs LP4 lights
- Cube light mounts framed by satin black aluminum panels
- Two reinforced clevis mounts for 3/4-inch D-ring shackles
- Optional 3/16-inch vented aluminum skid plate
SKU: ADSF230194120103 -
Bumpers
4 Wheel Parts Factory Bronco Winch Platform – 61368W
- Auxiliary front bumper winch platform for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Accommodates most standard winches up to a 12k pull rating
- Bolt-on, designed to integrate with the front bumper
- Black finish
- Not an OE bumper
SKU: 4WP61368W -
Bumpers
4 Wheel Parts Factory Bronco Front Bumper Skid Plate – 61269W
- Front bumper skid plate for the 2021–2026 Ford Bronco per the manufacturer fitment list
- Designed to integrate with the Full-Width Front Bumper
- Black steel, trail-ready powder coat
- Under body protection for the front of the vehicle
SKU: 4WP61269W -
-






















