Overview
The Skyjacker Adjustable Track Bar FTBA99 is a front track bar for 4 to 8 inches of lift, part number FTBA99. Its fitment covers the 2000–2004 Ford Excursion and the 1999–2004 Ford F-250 and F-350 Super Duty.
The bar is a three-piece design with a Teflon-lined spherical rod end. It relocates the bar to the top of the axle and offers 24 inches of total travel. It is a heavy duty replacement steering stabilizer designed to work with most lift kits.
Key features
- Fully adjustable length
- Three-piece, Teflon-lined design with a spherical rod end
- 24 inches of total travel
- Relocates the bar to the top of the axle
- Includes one left-hand and one right-hand 1.25 inch rod end, jam nuts and a track bar bushing kit
- Rated for 4 to 8 inches of lift
Setting length and lift
Track bars keep the axle centered side to side, and a lift moves the axle position, so the bar length has to be set to match. An adjustable bar makes that setting easier, but it still needs to be measured with the suspension at its normal ride height. Set the length before tightening the jam nuts so the rod ends sit square.
Steering geometry also changes with a lift, so inspect the drag link, tie rod ends and pitman arm when you install a new track bar. Worn rod ends or bushings can cause play, clunks or uneven tire wear that the track bar alone will not fix. Check the track bar mounting points and bolts after the first few drives and retighten as needed.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | FTBA99 |
| UPC | 80369616949 |
| Mounting location | Front |
| Lift range | 4 to 8 inches |
| Tube ID | 2 inches |
| Rod ends | 1.25 inch left-hand and right-hand |
| Jam nuts | 1.25 inch left-hand and right-hand |
| Total travel | 24 inches |
| Warranty | Limited lifetime |
Vehicle fitment
Covered trims are Eddie Bauer, Limited, XLS and XLT on the 2000–2004 Excursion, and Harley-Davidson Edition, King Ranch, Lariat, XL and XLT on the 1999–2004 F-250 and F-350 Super Duty. Confirm your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the length first, then tighten the jam nuts that lock the left-hand and right-hand rod ends. Check the lift height against the 4 to 8 inch range before fitting.
What’s included
One left-hand rod end, one right-hand rod end, one left-hand jam nut, one right-hand jam nut and a track bar bushing kit.








