Overview
The Fabtech FTS451 is an adjustable rear track bar for Ford Excursion and Ford Super Duty trucks running 3.5 inches to 8 inches of lift. A track bar, also called a Panhard bar, keeps the rear axle centered under the frame, and this unit replaces the stock bar so the axle housing location can be set to suit a specific suspension height.
It fits 2000–2004 Ford Excursion models and 1999–2004 Ford F-250 and F-350 Super Duty models in the trims shown below. It does not fit 1999–2000 models with a 5/8 inch track bar bolt head.
Key features
- Adjustable length to set the axle housing location under the frame
- Covers 3.5 inches through 8 inches of lift
- Replaces the stock unit with no cutting or welding
- Positioned at the rear axle
- Listed installation time of 30 minutes
Setting axle position
A track bar, sometimes called a Panhard bar, keeps the rear axle centered side to side under the frame. When the suspension is lifted, the stock bar often sits at the wrong length, so the axle can shift and the rear end can wander on the road. An adjustable bar lets the length be set so the axle sits centered at the chosen height.
Track bar work often goes with other suspension changes. Bushings, bump stops and brake lines should be checked during the job, and an alignment after installation keeps steering and tire wear on track. Worn bushings at the axle end can make a correctly set bar feel loose.
- Inspect the bushings at both ends of the bar
- Check the brake lines for clearance at full travel
- Recheck the bar length after the first highway drive
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS451 |
| UPC | 674866007321 |
| Position | Rear |
| Type | Adjustable track bar, HD construction |
| Lift range | 3.5 inches to 8 inches |
| Install time | 30 minutes |
Vehicle fitment
It fits the 2000–2004 Ford Excursion (Eddie Bauer, Limited, XLS, XLT), the 1999–2004 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT), and the 1999–2004 Ford F-350 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT).
It does not fit 1999–2000 models with a 5/8 inch track bar bolt head. It is not intended for Super Duty generations after 2004 or other Ford models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the track bar bolt head size on your truck before starting, because the 5/8 inch exclusion applies to 1999–2000 models. Set the length so the axle sits centered under the frame at your lift height, then check the alignment after installation.
What’s included
It is an adjustable track bar that replaces the stock unit.
Not included: Confirm the hardware you need before installing.









