Overview
The RockJock CE-9120RJL is an adjustable length rear trac bar with a Johnny Joint end, for the 2018 to 2026 Jeep Wrangler JL. It is bent to fit the JL and can be used on a stock JL, on a JL with the RockJock Off Road Suspension System, or anywhere in between. It fits the Rubicon, Sport and Sport S two-door trims and the Unlimited Moab, Rubicon, Sahara, Sport and Sport S four-door trims.
The bar is made from 1.250-inch outside diameter 4130 chrome moly steel tubing with a .250 wall. It has a heavy duty urethane bushing on the frame end and a forged 2-inch diameter Johnny Joint rod end on the other end, with a 1-inch right hand thread and a jam nut to set the length. The arm has a semi-gloss black powder coat, and the forged Johnny Joint end is finished in gold zinc plating.
Key features
- Adjustable length rear trac bar
- 1.250-inch outside diameter 4130 chrome moly tubing
- Heavy duty urethane bushing on the frame end
- Forged 2-inch diameter Johnny Joint rod end, greasable
- Jam nut on the adjustable 1-inch right hand thread
- Semi-gloss black powder coat with gold zinc plated joint end
Setting length on a lifted JL
A rear trac bar keeps the axle centered under the body, so changing ride height affects its geometry. Once the suspension is raised, the bar may need lengthening or shortening to keep the axle square and limit side-to-side movement. Adjust it in small steps and recheck the axle position after each change.
The Johnny Joint end lets the bar move through its arc without binding, which matters on uneven terrain. Grease the joint at regular intervals, and inspect the frame-end bushing for cracks or flattening. Keep the jam nut tight once the length is set so the adjustment does not drift on the trail.
- Check the bar after the first few trail runs
- Look for play in the Johnny Joint
- Confirm the axle is centered before final tightening
- Replace the urethane bushing if it cracks or flattens
Specifications
| Brand | RockJock 4×4 |
|---|---|
| Part number | CE-9120RJL |
| Position | Rear |
| Tubing | 1.250-inch outside diameter, .250 wall, 4130 chrome moly |
| Frame end | Heavy duty urethane bushing |
| Axle end | Forged Johnny Joint, 2-inch diameter, greasable |
| Thread | 1-inch right hand, with jam nut |
| Finish | Semi-gloss black powder coat; gold zinc plated joint |
| Fitment type | Direct fit |
| Vehicle | Jeep Wrangler JL, 2018 to 2026 |
Vehicle fitment
It fits the 2018 to 2026 Jeep Wrangler JL in the Rubicon, Sport and Sport S two-door trims and the Unlimited Moab, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door trims.
The rod end is JK-specific, so confirm fit for your vehicle’s year, model and trim before ordering. Other Wrangler generations are not covered.
What’s included
The product is one adjustable rear trac bar with its bushing and Johnny Joint end. Compare the included parts with your install plan before starting.








