Overview
The ReadyLift Heavy Duty adjustable front track bar, part number RDY77-6004, is a front track bar for the Jeep Wrangler JL and Gladiator JT. It uses an adjustable end link, so the bar length can be set on the vehicle. Welded bungs in the track bar construction make that adjustment possible.
A front track bar keeps the front axle centered side to side under the vehicle. After a lift, the stock bar can no longer hold the axle in the right position, so an adjustable bar is set to bring the front axle back to center. This bar is suited to correcting axle position and improving on- and off-road handling.
Key features
- Heavy duty adjustable front track bar
- Adjustable end link for setting the length on the vehicle
- Welded bungs used in the track bar construction
- Designed to reduce alignment time.
- Fits Wrangler JL and Gladiator JT models.
- Part number RDY77-6004
Front alignment and end link care
A front track bar in a Wrangler or Gladiator carries side loads through the axle, so its ends and bungs see steady stress. An adjustable end link is convenient for setting length on the vehicle, but the threads and bung welds should be kept clean and inspected. Set the length carefully and fit the locking hardware securely before the first drive.
After setting the bar, have the front alignment checked. Wear shows up as clunking over bumps, steering wander or uneven front tire wear. Replace worn ends rather than re-adjusting around them, since a worn joint keeps the axle from settling at the set length.
- Keep adjustment threads clean
- Inspect bungs and welds for cracks
- Recheck alignment after any length change
Specifications
| Brand | ReadyLift |
|---|---|
| Part number | RDY77-6004 |
| Position | Front |
| Type | Heavy duty adjustable track bar |
| Adjustment | Adjustable end link |
| Fit | Direct fit |
Vehicle fitment
It is a direct fit for 2018 to 2026 Jeep Wrangler (JL) models, including the Rubicon, Sport and Sport S two-door trims and the Moab, Rubicon, Sahara, Sport and Sport S four-door trims. It also fits 2020 to 2026 Jeep Gladiator (JT) models, including Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S.
Wrangler JK, TJ and LJ models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the adjustable end link on the vehicle after installation, then have the front alignment checked before driving the vehicle on the road.
What’s included
The heavy duty front track bar. Check the package contents against your installation before starting.






