Overview
The Rubicon Express RE2140 is a 1 inch drop for the transmission crossmember on Jeep CJ models. The drop helps reduce driveline angle and vibration on vehicles that do not use a CV driveshaft, and it works by lowering the transfer case mounting point.
It fits the Jeep CJ5 and CJ6 from 1959 to 1960 and 1966 to 1983 and 1966 to 1975, the CJ7 from 1976 to 1986, and the 1955 to 1958 Willys CJ-5 and CJ-6.
Key features
- 1 inch transmission crossmember drop
- Reduces driveline angle
- Helps reduce vibration
- Intended for vehicles without a CV driveshaft
Driveline angle basics
Driveline angle is the difference between the angle of the transmission output and the transfer case input, and the driveshafts carry the change between them. When the angles are mismatched, the shafts speed up and slow down through each turn, which shows up as vibration. Lowering the transfer case changes both angles, so the drivetrain should be checked after the drop is in.
Worn U-joints are often the first sign of an angle problem, so inspect them as part of the job. Check that the driveshafts do not bind at full suspension travel and that the transfer case mount has clearance. Keeping the joints greased helps them last longer under the new angles.
- Measure driveline angles after installation
- Check for shaft binding at full suspension travel
- Inspect U-joints for play or dry bearings
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2140 |
| UPC | 614901440096 |
| Drop | 1 inch |
| Mounting point | Transmission crossmember |
| Driveshaft | Non-CV |
Vehicle fitment
It fits the CJ5, CJ6 and CJ7 Jeep models and the Willys CJ-5 and CJ-6, across the trims for each.
The list covers the CJ models only, so the Wrangler, Cherokee and later models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One 1 inch transmission crossmember drop.






