Overview
The Skyjacker TCL25 is a transfer case lowering kit for vehicles with 2-inch or larger suspension. It lowers the transfer case with a 1-inch spacer placed between the frame rail and the transfer case skid plate, which reduces driveline angles.
Verify the year, model and trim against your build before purchase, and check that your suspension height is 2 inches or larger.
Key features
- Lowers the transfer case with a 1-inch spacer to reduce driveline angles
- Designed for use with 2-inch or larger suspension
- Predrilled mild steel tubing spacers
- Grade 8 zinc plated mounting bolts
- Rust resistant black powder coat finish
- Made in the USA
Choosing and installing a lowering kit
A transfer case lowering kit moves the transfer case down so the driveshaft runs at a gentler angle on a lifted vehicle. The spacer goes between the frame and the case, which adds clearance for the skid plate and crossmember. Lowering the case is usually paired with a driveshaft check, because some builds need a different shaft length.
Before work starts, support the vehicle on jack stands and move the shifter linkage and wiring out of the way. Inspect the frame mounting points for corrosion, and use the supplied hardware only after checking that the threads run clean. Plan to recheck bolt torque and driveline vibration after a short test drive.
- Check the frame mount area for rust
- Confirm the shifter linkage has room
- Retorque the mounting bolts after a short drive
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | TCL25 |
| UPC | 803696163031 |
| Spacer height | 1 inch |
| Spacer material | Mild steel tubing, predrilled |
| Finish | Rust resistant black powder coat |
| Mounting bolts | Grade 8, zinc plated |
| Suspension compatibility | 2 inch or larger |
| Country of manufacture | USA |
Vehicle fitment
The kit is intended for 2-inch or larger suspension, so check that your lift height matches before ordering. Verify the year, model and trim against your build before purchase.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit uses predrilled spacers and grade 8 mounting bolts, and no drilling steps are described. Lowering the transfer case changes driveline geometry, so check driveline angles after installation. Work under the vehicle only when it is safely supported on jack stands.
What’s included
The listed components are predrilled mild steel tubing spacers and grade 8 zinc plated mounting bolts.







