Select your vehicle
-13%

TeraFlex Transfer Case Lowering Kit – 1900000

TeraFlex

$43.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 3:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Transfer case lowering kit that drops the case 1/2 inch
  • Includes six lowering spacers and all necessary hardware
  • Designed to reuse the factory transfer case bolts
  • Helps reduce driveshaft vibration on a lifted TJ
  • Shift linkage adjustment may be necessary
  • Part number TER1900000

Description

Overview

The TeraFlex transfer case lowering kit, part number TER1900000, lowers the transfer case by 1/2 inch on the Jeep Wrangler TJ. The drop reduces driveshaft vibration that comes from the higher ride height of a lifted Jeep, and it fits the 1997–2002 Wrangler (TJ) SE, Sahara, Sport and X models.

The kit is most useful on TJs that do not have adjustable control arms, or that have not installed a slip yoke eliminator kit. It bolts in using the factory transfer case bolts, and the six spacers and hardware are included. Because the transfer case moves, shift linkage adjustment may be needed after installation.

Key features

  • Lowers the transfer case 1/2 inch
  • Six lowering spacers included
  • Reuses the factory transfer case bolts
  • Designed to reduce driveshaft vibration on lifted Jeeps
  • All necessary hardware included

Choosing a lowering setup

A transfer case drop changes the angles of both driveshafts, so it is worth looking at the whole driveline before adding a lowering kit. On a lifted Jeep the transfer case sits higher than stock, and a drop brings it closer to the axle line, which reduces the steep angles that cause vibration. Check whether the truck already has adjustable control arms or a slip yoke eliminator, since those parts change the driveline geometry.

After installation, measure the driveshaft angles and inspect the U-joints for wear. Look at the shifter linkage for binding or a changed feel, and adjust it if needed. Re-check the transfer case bolts after the first few trail runs, because the case can settle slightly under load.

  • Check driveshaft angles at both ends
  • Inspect U-joints for play or wear
  • Recheck transfer case bolts after early use

Specifications

Brand TeraFlex
Part number TER1900000
Product type Transfer case lowering kit
Drop 1/2 inch
Spacers 6
Mounting Reuses factory transfer case bolts
Fitment Direct fit

Vehicle fitment

It fits the 1997–2002 Jeep Wrangler (TJ) in its SE, Sahara, Sport and X models. It is intended for TJs with a lift that raises the ride height above two inches.

The list covers the TJ Wrangler from 1997 to 2002 only, so the 2003 to 2006 TJ and the LJ and JK Wranglers are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Expect shift linkage adjustment on some trucks after the transfer case is lowered. Check the driveshaft angles once the kit is installed.

What’s included

Six lowering spacers and all necessary hardware for the transfer case.

Fitment

VehicleYearsTrims
Jeep Wrangler (TJ)1997–2002SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TeraFlex TER1900000 fit a 2004 Jeep Wrangler TJ?

No. It fits the 1997 to 2002 Jeep Wrangler TJ, so 2003 and later TJ years are not included. Confirm your vehicle's year, model and trim before ordering.

How far does the kit lower the transfer case?

It lowers the transfer case 1/2 inch. The drop reduces driveshaft vibration caused by a ride height above two inches.

Will I need to adjust the shifter?

Possibly. Shift linkage adjustment may be necessary after the transfer case is lowered, so check the linkage once the kit is installed.

Does the kit include hardware?

Yes. It includes six lowering spacers and all necessary hardware, and it reuses the factory transfer case bolts, so the bolts already on the truck are used.

How often should the drop hardware be inspected?

Check the bolts and spacers during regular underbody inspections, especially after the first few trail runs. Look for loose fasteners, cracked spacers and any rubbing on the driveshaft or crossmember.

Does lowering the transfer case affect the front driveshaft?

It can change the front driveshaft angle as well, so check both joint angles once the kit is installed. Excessive angles can cause vibration and U-joint wear, and correcting them may require a driveshaft change.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon