Overview
The Rough Country transfer case drop kit, part number R/C1072, is a bolt-on kit for the 1984–2001 Jeep Cherokee (XJ) and the 1986–1992 Jeep Comanche (MJ). Its job is to lower the transfer case so the driveshaft angles improve on a lifted truck.
Rough Country recommends the kit for vehicles with 4.5 to 6.5 inches of suspension lift. Rough Country says better driveshaft angles reduce driveline vibration.
Key features
- Bolt-on installation
- Improves driveshaft angles
- Reduces driveline vibration
- Recommended for 4.5 to 6.5 inches of suspension lift
Driveline angles on a lifted Jeep
Raising a Jeep changes the angle between the transfer case and the driveshaft. Steep angles increase vibration and can wear the u-joints quickly, while a transfer case drop moves the output shaft down to bring the angles back toward a workable range. The change helps the driveline work more smoothly, though it does not replace correct shock and spring geometry.
Because a drop kit moves a major driveline component, check the transfer case mounts, the crossmember and the driveshaft length after installation. Look for u-joint play and for any binding at full suspension travel, and confirm the transmission and transfer case fluid levels once the work is done.
- Check driveshaft u-joints for play after installation
- Inspect crossmember and transfer case mounts
- Confirm fluid levels after the change
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1072 |
| Product type | Transfer case drop kit |
| Installation | Bolt-on |
| Recommended lift | 4.5-6.5 in. of suspension lift |
| Fitment | Direct fit |
Vehicle fitment
It is a fit for the 1984–2001 Jeep Cherokee (XJ) in its Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport models, and for the 1986–1992 Jeep Comanche in its Base, Chief, Custom, Eliminator, Laredo, Pioneer, X and XLS models.
The list covers the XJ Cherokee and the MJ Comanche only. Other Jeep models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is a bolt-on part. Check the driveshaft angles after installation on a lifted truck.








