Overview
The Skyjacker TCL35 is a transfer case lowering kit sold as a kit, with a listed lowering height of 2 to 4 inches. Skyjacker says any suspension lift of 2 in. or more can benefit from it, because it reduces driveshaft angles and helps eliminate driveline vibration.
The TCL35 fits the 1976–1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade versions, the 1976–1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade versions, and the 1981–1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR versions.
Key features
- Lowering height of 2 to 4 inches
- One-piece spacer bars
- Gains height without sacrificing the driveshaft
- Reduces driveshaft angles toward stock
- Limited lifetime warranty
Spacer Bars and Shaft Angles
Spacer bars lower the transfer case by moving it down on its mounts, which changes the angle and position of the output shaft. On older Jeep chassis, a lift can leave the driveshaft steeper than it was from the factory. Lowering the transfer case is one way to bring those angles back closer to stock, though the result depends on the whole lift setup.
Before choosing spacer bars, measure the current lift height and the driveshaft angles. Note whether the front and rear driveshafts are both affected, and check the U-joints for play. Transfer case mounts, crossmembers and shift linkage may need attention when the case moves, so look at those parts during installation.
- Measure the existing lift height before ordering
- Check U-joints and driveshaft slip yokes
- Recheck shift linkage after the transfer case moves
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYTCL35 |
| Product type | Transfer case lowering kit |
| Lowering height | 2 to 4 inch |
| Spacer bars | One-piece |
| Sold as | Kit |
| Warranty | Limited lifetime warranty |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 in Base, Golden Eagle, Laredo, Limited and Renegade versions, the 1976–1986 Jeep CJ7 in Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade versions, and the 1981–1985 Jeep Scrambler in Base, Laredo, Renegade, SL and SR versions.
The list does not cover the Wrangler or the Cherokee, and does not include the CJ5 or CJ7 years outside those listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Skyjacker says any suspension lift of 2 in. or more can benefit from this kit. Measure the driveshaft angles after installation, and have the alignment checked once the lift is complete.
What’s included
The kit includes the one-piece spacer bars. Check the package contents against your installation before starting.








