Overview
The Pro Comp transfer case lowering kit, part number 55589, lowers the transfer case by 1 inch total to restore driveline angles on a lifted Jeep. It fits the 1987 to 1995 Jeep Wrangler (YJ) and the 1997 to 2002 Jeep Wrangler (TJ), and it is designed for vehicles with a 2 to 4 inch lift.
On a lifted Jeep, the driveshafts run at steeper angles, which can cause vibration. Lowering the transfer case brings those angles back within tolerance and reduces driveline vibration on lifted applications.
Key features
- 1 inch total drop at the transfer case
- Designed for vehicles with a 2 to 4 inch lift
- Restores driveline angles to within tolerance
- Fits YJ and TJ Wrangler models
Driveline angles and the transfer case
Driveline angles matter because U-joints work best when the input and output shafts run at similar angles. Once a lift raises the axles, the transfer case output and the driveshaft can end up far apart in angle, and the joints wear faster and vibrate. Lowering the transfer case shortens that gap, but it can also change the driveshaft length, so measure the shafts before and after the change.
The shifter linkage and the transfer case mounts also move when the case is dropped. Check that the shifter reaches every gear with full travel, and look for stretched or binding linkage after the first drives. A lowered case sits closer to the ground, so skid protection becomes a practical addition for trail use.
- Check driveshaft U-joints for play after the drop
- Inspect the transfer case mounts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 55589 |
| UPC | 614901110869 |
| Total drop | 1 inch |
| Intended lift | 2 to 4 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987 to 1995 Jeep Wrangler (YJ) and the 1997 to 2002 Jeep Wrangler (TJ) across the trim levels of those model years. Confirm the year and model before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit is intended for a Wrangler with a 2 to 4 inch lift. A transfer case drop changes the driveshaft lengths and angles, so inspect the driveshafts for binding after installation and check the transfer case shifter linkage for proper travel.
What’s included
Confirm the included parts against your installation before starting the job.









