Overview
The Rubicon Express RE3786 is a Super-Ride control arm bushing with a PTMEG body, which stands for polytetramethylene ether glycol. It has a steel sleeve, replaces factory bushings, can be field serviced on the trail, and retrofits all Rubicon Express control arms. The inside diameter is 9/16 inch and the finish is black.
The PTMEG material is rated at 88A durometer. Its polymer body is built for durability and keeps the extreme articulation trail builders want while adding control. A lifetime warranty covers the bushing.
A bushing has to match the control arm bore and the arm design. Confirm the arm and your vehicle’s year, model and trim before ordering.
Key features
- PTMEG bushing body
- Steel sleeve
- 88A durometer rating, per the manufacturer
- 9/16 inch inside diameter
- Black finish
- Field serviceable and easy to lubricate on the trail.
- Retrofits all Rubicon Express control arms
- Lifetime warranty, per the manufacturer
Caring for control arm bushings
Control arm bushings carry the load where the arm meets the axle or frame, so they are one of the first wear points on a trail rig. Over time a bushing can flatten, crack or develop play, which shows up as clunking over ledges or an uneven steering feel. Inspecting the bushings during regular maintenance helps catch wear before it affects the arm’s alignment.
A polymer body with a steel sleeve is designed to hold its shape under load and resist the movement that wears out rubber. When fitting a new bushing, keep the bore clean and free of old grease, and press the bushing square so the sleeve is not pinched. Lubricate the bushing at a regular interval, and check the arm bolts after the first few trail outings.
- Look for cracks or splits in the polymer body
- Check for play by rocking the arm by hand
- Re-check arm bolts after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3786 |
| UPC | 614901440904 |
| Type | Super-Ride PTMEG control arm bushing |
| Material | PTMEG with steel sleeve |
| Durometer | 88A |
| Inside diameter | 9/16 inch |
| Color | Black |
| Fitment listed | Universal fit |
Vehicle fitment
Confirm the control arm bore and arm design on your vehicle before ordering, since this bushing must match both.
The bushing is intended for Rubicon Express control arms, so confirm the arm design and bore size on the vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pressing the bushing into the arm needs the correct tools and a clean bore. The bushing is designed to install and lubricate easily, and it can be serviced on the trail. Check the fit before the arm goes onto the vehicle.
What’s included
One black PTMEG control arm bushing with a steel sleeve and an inside diameter of 9/16 inch. Check the package contents against your installation before starting.


