Overview
The Rubicon Express control arm bushing is an upper, small, Clevite style bushing in black, part number RE3782. It is a factory replacement rubber upper control arm bushing for a 10mm bolt, and it needs a press to install.
It can also be used with the Small Cold Cut End Ring, part number RM12580, for builders.
Key features
- Upper control arm small bushing
- Rubber construction
- For a 10mm bolt
- Clevite style
- Black color
- Factory replacement design
- Needs a press to install
- Can be used with the Small Cold Cut End Ring (RM12580)
Control arm bushing wear signs
Upper control arm bushings control how the arm moves as the suspension cycles, and rubber breaks down over time with heat, road grime and load. Wear shows up as clunks over bumps, wandering steering on the highway or uneven tire wear. Because the bushing is part of the arm’s pivot, a worn one can also change alignment, which is why replacing it should be followed by an alignment check.
When replacing a bushing, inspect the control arm and sleeve for cracks, bends and corrosion. Old bushing material can leave a bore that does not seat cleanly, so clean it before pressing in the new part. Plan to replace bushings in pairs on the same axle when both show wear, since the two often age at a similar rate.
- Clunks or knocks over bumps
- Wandering or pulling at highway speed
- Uneven tire wear along one edge
- Cracked or split rubber on the bushing face
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3782 |
| UPC | 614901440850 |
| Product type | Control arm bushing, upper, small |
| Style | Clevite style |
| Material | Rubber |
| Color | Black |
| Bolt size | 10mm |
| Installation | Needs a press |
| Fitment listing | Universal fit |
Vehicle fitment
It is a universal fit bushing, so confirm the application for your vehicle before ordering. It is a factory replacement bushing suited to builders as well as stock rebuilds.
Confirm the sleeve and arm dimensions against your control arm before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bushings need a press and the correct tool for installation. Control arm bushings affect suspension geometry, so professional installation is a good choice.
Torque the control arm fasteners to specification with the suspension at ride height, and have the alignment checked afterwards. Re-check the fasteners after the first miles of driving.
What’s included
one rubber upper control arm bushing.

