Select your vehicle

Crown Automotive Rear Lower Control Arm Bushing – 52038026

Crown Automotive

$24.07In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits the 1993–1998 Jeep Grand Cherokee (ZJ) with several trims
  • Crown Automotive part number 52038026, UPC 848399014808
  • Rubber rear lower control arm bushing, direct fit
  • Position is Front Left Lower; match it to the arm being replaced

Description

Overview

The Crown Automotive 52038026 is a rubber rear lower control arm bushing for the 1993–1998 Jeep Grand Cherokee (ZJ). Crown Automotive part number 52038026 and UPC 848399014808 identify this replacement bushing.

The bushing is marked Front Left Lower, which conflicts with its rear designation, so compare the mounting location with the old bushing before fitting it. Crown Automotive has long been a maker and distributor of Jeep replacement parts.

Key features

  • Rubber construction
  • Rear lower control arm bushing, as titled
  • Direct fit design.
  • It fits the 1993–1998 Jeep Grand Cherokee (ZJ) across several trims.
  • Crown Automotive part number 52038026 for cross-checking against the removed bushing

Control arm bushing replacement

A rubber control arm bushing isolates the arm from the frame and axle, absorbing road noise and small movements. Over time the rubber can crack, tear or flatten, which lets the arm move more than it should and can make steering feel vague.

Before pulling the old bushing, mark the arm and note its orientation, since the bushing position affects alignment and handling. Clean the bore and check it for rust or distortion, then press in the new bushing squarely. Replacing both sides at the same time keeps handling even from left to right.

Other front end parts, such as ball joints and the arm itself, should be inspected while the bushing is out. A worn arm or joint can make a new bushing wear faster, and an alignment check after the job helps confirm everything is set correctly.

  • Mark the arm before removing the bushing
  • Clean and inspect the bore for rust
  • Replace both sides together

Specifications

Brand Crown Automotive
Part number 52038026
UPC 848399014808
Material Rubber
Position Front Left Lower
Fitment type Direct fit

Vehicle fitment

It fits the 1993–1998 Jeep Grand Cherokee (ZJ) with the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims.

Other Grand Cherokee generations and other Cherokee models are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation, including any hardware you need, before fitting it.

SKU: CRO52038026 Category:

Specification

Shipping weight 2.00 lbs
Package dimensions 3.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Crown Automotive 52038026 fit a 1993 to 1998 Jeep Grand Cherokee ZJ?

Yes. It is a direct fit bushing for the 1993–1998 Jeep Grand Cherokee (ZJ), with the 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trims included. Confirm your year and trim before ordering.

Is this bushing for the front or rear control arm?

The bushing is designed for the rear lower control arm, but its position is marked Front Left Lower. Match it to the arm you are replacing.

What are the part number and UPC for this bushing?

The part number is 52038026 and the UPC is 848399014808. Both identifiers appear in the specifications table, which helps when you compare the old and new bushing.

What material is the bushing made from?

It is made from rubber. Compare the feel, shape and size with your original bushing before fitting, and check the hardness against what you removed.

How can you tell a control arm bushing has worn out?

Look for cracks, tears, or bulging rubber, and listen for clunks over bumps or wander on the highway. Movement at the arm when you pry it by hand also points to wear. Inspect both sides during the same job.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon