Overview
The Moog K200184 is a rearward front lower control arm bushing for the 2006–2010 and 2011–2013 Dodge Ram 1500. It is for trucks with 5-lug wheels, and two kits are needed per vehicle.
It is a direct-fit replacement for the rearward front lower control arm position.
Key features
- Rearward position for the front lower control arm
- For 5-lug wheels
- Direct fit for the listed Ram 1500 models
- Two kits required per vehicle
Alignment after control arm work
Front lower control arms carry the weight of the front end and locate the lower ball joint and the steering knuckle. The bushings at the frame let the arm swing while holding it in the right position. When a bushing softens or splits, the wheel can shift during braking, and the tire may start to scrub or cup along its tread.
Replacing control arm bushings changes the geometry slightly, so a wheel alignment after the work helps the tires last. Torque the arm fasteners to the vehicle specification with the suspension at ride height, rather than with the truck hanging on the lift. Check the shock and sway bar links at the same time for wear.
- Check both sides for matching wear
- Torque fasteners with the suspension loaded
- Inspect sway bar links during the job
Specifications
| Brand | Moog |
|---|---|
| Part number | K200184 |
| Position | Front lower control arm, rearward |
| Wheel fitment | 5-lug |
| Quantity per vehicle | 2 kits |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006–2010 Dodge Ram 1500 (Laramie, SLT, SRT-10, ST, SXT, Sport, TRX and TRX4) and the 2011–2013 Ram 1500 (Big Horn, Express, HFE, Laramie, Laramie Longhorn, Outdoorsman, R/T, SLT, ST, Sport, Tradesman and Tradesman HD).
The list does not include the 2005 and earlier Ram 1500, the 2014 and later Ram 1500, or the 2500 and 3500 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each front lower control arm needs its own bushing, so both sides require a kit. Have the alignment checked after replacing control arm bushings.
What’s included
Two kits are required per vehicle. Check the hardware in each kit against your installation before starting.










