Select your vehicle

Rubicon Express Control Arm Bushing Sleeve – RM10200

Rubicon Express

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Lower control arm bushing sleeve for the large Super-Ride bushing
  • Steel
  • Part number RM10200

Description

Overview

The Rubicon Express RM10200 is a lower control arm bushing sleeve made of steel. It is for lower control arms that use the large Super-Ride bushing.

Fit depends on your arm and its bushing size, so check the sleeve against the large Super-Ride bushing before installing.

Sleeve and bushing wear

A bushing sleeve sits inside the bushing and gives the pivot bolt a smooth, round surface to turn against. When the sleeve wears, the bushing can rotate or shift inside the arm, which leads to clunking and a loose feel at the arm end. Steel sleeves hold their shape well, but they can still corrode or crack.

Inspect the sleeve whenever the bushing is changed. Look for grooves, flat spots, burrs at the ends, and rust that builds between the sleeve and the bushing. A sleeve with any of these faults should be replaced so the new bushing seats correctly.

Apply a light coating of suitable lubricant to the sleeve during assembly, and tighten the pivot hardware to the torque in your service manual. Recheck the joint after the first few drives, since new parts can settle slightly.

Specifications

Brand Rubicon Express
Part number RM10200
UPC 614901444742
Position Lower
Bushing Large Super-Ride
Material Steel

Vehicle fitment

The sleeve is made for the large Super-Ride bushing, so measure that bushing on your arm before ordering.

Confirm your vehicle’s year, model and trim before ordering.

SKU: R/ERM10200 Category:

Specification

Shipping weight 0.20 lbs
Package dimensions 4.00 × 0.80 × 0.80 in
brands

Questions & Answers

Which bushing does it fit?

It fits the large Super-Ride bushing on lower control arms. Measure that bushing before ordering to confirm the sleeve size matches, since a sleeve that is off by size will not seat correctly in the arm.

What is it made from?

The sleeve is made of steel. It is designed for the lower position, so it sits in the lower control arm bushing bore. Inspect it for cracks, burrs or corrosion before installing and replace it if the surface is damaged.

How do I know when a bushing sleeve needs replacing?

Look for a sleeve that has spun in the arm, cracked edges or corrosion at the bore. Clunking or a loose feel at the arm end often points to a sleeve or bushing that has moved or worn.

Should the sleeve be replaced with a new bushing?

Usually, when a new bushing is installed. A fresh bushing needs a sleeve that matches its inner and outer diameters, and an older sleeve may have worn surfaces that shorten the bushing life.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon