Overview
The Rubicon Express Super-Ride PTMEG Control Arm Bushing with a 1/2 inch ID sleeve (Black), part number RE3785, is a steel-sleeved PTMEG replacement bushing that Rubicon Express says will retro-fit all Rubicon arms.
PTMEG stands for Polytetramethylene Ether Glycol and carries an 88A durometer rating. The bushings can be installed, lubricated and serviced out on the trail, and they replace factory bushings while keeping articulation.
Key features
- Steel-sleeved PTMEG bushing that can be field serviced
- PTMEG material with an 88A durometer rating
- Retro-fits all Rubicon arms.
- Flexible design intended to support durability and control without limiting articulation
- Easy to install, lubricate and service on the trail
- A lifetime warranty covers failure of the bushing.
- Black, with a 1/2 inch ID sleeve
Sleeve size and fit
The sleeve inside the bushing is what the mounting bolt passes through, so its inside diameter has to match the hardware in your arm. Measure the existing sleeve and the bolt before ordering, and remember that a sleeve that is too tight can crush the bushing during installation.
Bushings on the same axle wear at similar rates, so inspect the opposite arm while the first one is off. Clean the sleeve and bore thoroughly before pressing in the new bushing, and avoid forcing it with a tool that can distort the sleeve.
- Measure the existing sleeve and bolt before ordering
- Confirm the sleeve ID matches your mounting hardware
- Inspect the opposite arm while it is off
- Clean the bore before pressing in the new bushing
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE3785 |
| UPC | 614901440898 |
| Product type | Control arm bushing |
| Material | PTMEG (Polytetramethylene Ether Glycol) |
| Durometer | 88A |
| Sleeve | Steel, 1/2 inch ID |
| Color | Black |
| Warranty (per manufacturer) | Lifetime warranty against failure |
| Fitment type | Universal fit |
Measure your existing bushing and sleeve before ordering if size matters for your build.
Vehicle fitment
It is intended for Rubicon Express control arms. Confirm your vehicle’s year, model and trim before ordering, and check the arm you plan to use.
Compare part number RE3785 with your vehicle’s year, model, trim, engine and drivetrain so you receive the correct part.
Installation notes
- Professional installation is recommended for suspension, steering and brake components.
- Torque every fastener to its specified value and re-check it after the first miles of driving.
- Have the alignment checked after any suspension or steering work, and check that tires, hoses and lines have clearance through the full range of travel.
What’s included
One Super-Ride PTMEG control arm bushing with a 1/2 inch ID sleeve. Check the package contents against your installation before starting.




