Select your vehicle

Skyjacker 2.5 Inch Dual Rate Long Travel Suspension Lift Kit with M95 Monotube Shocks – TJ25BPMLT

Skyjacker

Shop Jeep Wrangler TJ Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Skyjacker 2.5 inch dual rate long travel suspension lift kit with M95 Monotube shocks, part number TJ25BPMLT
  • Shocks included, M95 Monotube front and rear
  • Coil spring rear lift, 0 to 3.5 inch lift range
  • Fits 1997–2006 Wrangler TJ and 2004–2006 Wrangler LJ Unlimited

Description

Overview

The Skyjacker 2.5 Inch Dual Rate Long Travel Suspension Lift Kit with M95 Monotube Shocks, part number TJ25BPMLT, is a 2.5 inch suspension lift for the Jeep Wrangler. It fits the 1997–2006 Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the 2004–2006 Wrangler LJ Unlimited and Unlimited Rubicon.

Skyjacker says its lift kits give a smooth, comfortable ride while responding to on- and off-road conditions. The kit is listed with a lift height range of 0 to 3.5 inches and includes M95 Monotube front and rear shocks, plus coil springs at the rear.

Key features

  • 2.5 inch suspension lift
  • Dual rate long travel design
  • M95 Monotube shocks, front and rear
  • Rear coil spring lift
  • Mounting hardware and detailed instructions included
  • Available for 2WD or 4WD vehicles

Dual rate and ride height

A dual rate long travel setup changes how the suspension responds at different stages of compression. The softer initial rate helps on pavement, while the firmer rate at full travel helps control the body over bumps and ruts. Expect the ride to feel different after the lift, especially with the rear raised on coil springs.

Because the rear height depends on coil spring setup, check the front and rear measurements after installation, not just the number on the box. Inspect the shocks, bushings and brake lines during the first few service intervals, and keep track of any changes in steering feel or tire wear.

  • Measure front and rear height after fitting
  • Inspect bushings and shock mounts at each service
  • Watch tire wear after the height change

Specifications

Brand Skyjacker
Part number TJ25BPMLT
Suspension type Long travel lift kit
Lift 2.5 inch
Lift height range 0 to 3.5 inches
Shocks M95 Monotube, front and rear
Shocks included Yes
Rear lift component Coil spring

Vehicle fitment

It is a direct fit for the 1997–2006 Jeep Wrangler TJ in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and for the 2004–2006 Wrangler LJ Unlimited and Unlimited Rubicon.

Wrangler JK, JL and other models are not in the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The kit comes with its mounting hardware and instructions. Since the rear lift uses coil springs, check the spring and shock setup against the lift height you want before fitting.

What’s included

Lift kit with M95 Monotube shocks, front and rear, plus mounting hardware. Check the parts received against your installation before starting.

SKU: SKYTJ25BPMLT Categories: ,

Fitment

VehicleYearsTrims
Jeep Wrangler (LJ)2004–2006Unlimited, Unlimited Rubicon
Jeep Wrangler (TJ)1997–200665th Anniversary Edition, Rubicon, SE, Sahara, Sport, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the TJ25BPMLT fit a Jeep Wrangler TJ?

Yes. It fits the 1997–2006 Wrangler TJ in several trims, including Rubicon, Sahara and X. Confirm your year and trim before ordering.

Are shocks included with this kit?

Yes. M95 Monotube shocks come with the kit, one set at the front and one at the rear. Check the shock length against the new height before fitting.

What is the lift height range?

The lift range runs from 0 to 3.5 inches, and the kit itself is a 2.5 inch suspension lift. Confirm the height you need against the coil springs and shocks before ordering or fitting.

Should the front and rear heights match after a lift?

Not always. A rear coil lift can leave the rear sitting higher than the front, so measure both ends after fitting. Use the measurements to decide on shims, bump stops or other adjustments before driving on the highway.

How often should the long travel shocks be checked?

Inspect the shocks at every oil change or service, looking for leaks, torn bushings and loose mounts. Check the upper and lower bolts after the first few trips, since new lift hardware can settle as it breaks in.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler TJ Lift Kits on Amazon