Overview
The Rock Krawler LJ45TR-S1 is a 4.5-inch Trail Runner Stage 1 coilover long arm lift kit for the 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon, and for the 2005 Wrangler TJ Rubicon. The front uses RRD 2.625 coilover shocks, and the rear uses a coil spring setup. The kit is a direct fit for those vehicles.
The system includes four tuned 2.625 RRD coilover shock assemblies and eight weld-on coilover mounts. The lower control arms are four high misalignment, double adjustable long arms. The front upper control arm is double adjustable and mounts to the axle side through a front upper control arm mount. Two double adjustable rear upper triangulated 4-link arms and a rear triangulated 4-link mounting cradle with an axle truss complete the rear. A skid plate and its mounting brackets are included, and the kit comes with hardware and detailed instructions.
Key features
- Trail Runner Stage 1 coilover long arm design
- Four tuned 2.625 RRD coilover shock assemblies
- Eight weld-on coilover mounts
- Four high misalignment, double adjustable lower long arms
- Double adjustable front upper control arm and axle side mount
- Two double adjustable rear upper triangulated 4-link arms
- Rear 4-link mounting cradle and axle truss
- Skid plate and mounting brackets
Before the install
A coilover long arm setup puts the spring and damper at each corner, so the weight of the truck sits on the coilover and not on a separate spring. Before cutting or welding, check the frame, the axle housing and the body mounts for rust and cracks. Solid mounting points carry the load for the whole system, and weak metal around the weld points is the most common problem on older frames.
Long travel at the front and rear means the driveline, brake lines and wiring need a look during the install. Check that the brake hoses have enough slack at full droop and that wiring is clear of the new arms. Skid plates protect the lower components, but they add weight, so think about how the truck will be used on the trail.
- Inspect the frame at each weld point before starting
- Check brake lines for slack at full droop
- Mark driveline clearance before final tightening
- Keep hardware sorted by location during install
Specifications
| Brand | Rock Krawler |
|---|---|
| Part number | RKSLJ45TR-S1 |
| Lift size | 4.5 inches, per the product name |
| Front shocks | RRD 2.625 coilovers, four tuned assemblies |
| Mounting | Eight weld-on coilover mounts |
| Rear lift component | Coil spring |
| Skid plate | Included, with mounting brackets |
| Fitment type | Direct fit |
Vehicle fitment
It fits 2004 to 2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon models, and 2005 Jeep Wrangler TJ Rubicon models.
Other years and versions fall outside this kit’s fit. Verify the year, model and trim on your vehicle before purchase.
Installation notes
Eight weld-on coilover mounts are part of the install, so welding is required. Long arm geometry changes the alignment, so have a wheel alignment done after installation, and check driveline angles once the coilovers are set.
What’s included
The system includes four RRD 2.625 coilover shock assemblies, eight weld-on coilover mounts, four lower long arms, the front upper control arm and its axle side mount, two rear upper 4-link arms, the rear 4-link mounting cradle with axle truss, the skid plate and brackets, plus hardware and instructions.






