Overview
The Trail Master 4 inch Complete Lift Kit with Coil Springs, part number TJSTG238-4, is a suspension and wheel package sold by Genuine Packages for the Jeep Wrangler TJ and LJ. It raises the vehicle with coil springs and comes with a set of four 33 inch Pro Comp Xtreme M/T 2 tires mounted on Trail Master 15×8 black steel wheels.
The kit raises the vehicle 3 to 4.99 inches. Its coil spring and control arm setup is built for extreme off road trails while staying quiet and dependable on the road. It limits wear on factory ball joints and steering components and reduces noise and vibration. The package includes everything needed to raise the vehicle, so no separate lift parts are needed.
Key features
- Front and rear coil springs for a 4 inch lift
- Tubular lower control arms of high-grade alloy steel for strength and proper geometry
- Flex-joint bushing technology
- Front and rear NCG shocks
- Sway bar end links
- Transfer case drop to maintain drive shaft angles
- Precision laser cut bolt holes, CNC machined spindles and CNC press-brake formed brackets
Before you buy
A coil spring lift replaces the factory springs and usually comes with new control arms, shocks and steering links, so the suspension geometry changes as one set. Before installing, look at how far the vehicle will sit higher and what else it affects, such as bumpers, brake lines and the fuel tank skid. Taller tires add rotating weight and change gearing, which can affect braking and throttle response on the highway.
Joints and bushings wear faster once the suspension works at a new angle, so many owners replace them during a lift. Look for leaking shock bodies, cracked bushings, play in ball joints and uneven tire wear after the first few drives. Plan a full alignment at the end of the job, since caster and toe settings shift with a lift.
- Check steering stop clearance after the first install
- Re-torque fasteners after the first few trail runs
- Inspect bushings and ball joints on a regular schedule
Specifications
| Brand | Genuine Packages |
|---|---|
| Part number | TJSTG238-4 |
| UPC | 700007267601 |
| Suspension type | Coil spring kit |
| Lift method | Coil springs, front and rear |
| Lift height range | 3 to 4.99 inches |
| Shocks | Front and rear NCG shocks included |
| Tires | Set of 4, 33 inch Pro Comp Xtreme M/T 2 |
| Wheels | Set of 4, Trail Master 15×8 black steel |
| Wheel finish | Flat or gloss black powder coat |
Vehicle fitment
The kit fits 2004–2006 Jeep Wrangler (LJ) and 1997–2006 Jeep Wrangler (TJ) models, including the Unlimited body style. It does not fit JK or JL Wrangler generations or any other model, so do not order it for those vehicles.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The transfer case drop is part of the kit because it keeps the drive shaft angles in range after the lift. Wheel alignment and driveline angles should be checked after the lift is installed, and the tires should be checked for clearance at full steering lock.
What’s included
Front and rear coil springs, sway bar end links, tubular lower control arms, front and rear NCG shocks, transfer case drop, a set of four 33 inch Pro Comp Xtreme M/T 2 tires, and a set of four Trail Master 15×8 black steel wheels with center caps and lug nuts.
Not included: TPMS sensors, which are sold separately.







