Overview
The Pro Comp Suspension 57489B is a rear suspension lift kit that provides 3.5 in. of lift and includes a rear block kit. Lift blocks sit between the rear axle and the leaf springs to raise the back of the vehicle. It is a direct fit kit.
The blocks are tapered to improve the vehicle’s driveshaft angle and are made of cast iron. They are for the rear axle only and are not for use on a front axle. Other parts are needed for a complete kit.
Key features
- 3.5 in. lift
- Includes a rear block kit
- Tapered to improve the vehicle’s driveshaft angle
- Cast iron
- Rear suspension only; do not use on the front axle
- Other parts are required for a complete kit
Rear lift and brake lines
Raising the rear with blocks changes the geometry of the whole rear end. The leaf springs stay in place, but the axle moves higher, which changes pinion angle, driveshaft length and the length of brake lines and shocks. Tapered blocks help manage the driveshaft angle, though they do not remove the need to check the rest of the system.
Before buying, consider how far the rear will move and whether the brake and shock lengths will allow full travel. Rear lifts also change ride height and can affect load handling, so think about how the vehicle will be driven. After installation, road test the vehicle slowly and check for binding or rubbing as the suspension moves.
- Check brake line length at full droop
- Measure driveshaft angle after installation
- Inspect shock extension and bump stops
- Get an alignment after the lift
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57489B |
| UPC | 614901109320 |
| Product type | Rear suspension lift kit |
| Lift height | 3.5 in. |
| Position | Rear |
| Contents | Rear block kit |
| Material (listing text) | Cast iron |
| Design | Tapered, to improve driveshaft angle |
| Fit type | Direct fit |
Vehicle fitment
The kit is labeled Direct Fit, but no vehicle, year range or chassis code is given, so no fitment is stated here.
Confirm fit for your vehicle’s year, model, trim and axle setup before ordering, along with the other parts needed for a complete kit.
Installation notes
A lift kit changes how the steering, brakes and driveline sit, so a professional installer should handle this work. Work on level ground with the vehicle held on proper jack stands, and torque the hardware to the specified values.
After the first few drives, go back over the bolts. Since blocks alter the driveshaft angle, look at driveshaft and brake-line clearance as the suspension cycles, and get an alignment. Lift height rules differ by area, so look up yours.
Lift blocks change the driveshaft angle and brake line and shock length, so confirm that each is within limits for your vehicle and that all required parts are in hand before starting.
What’s included
- Rear block kit, 3.5 in. lift
Not included: Other parts needed for a complete kit. Confirm which parts your vehicle needs before starting.









