Select your vehicle
-13%

Pro Comp 6″ Stage I Lift Kit with PRO-X Shocks – K4077T

Pro Comp Suspension

Shop Ford Bronco Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 6-inch stage 1 lift with PRO-X front and rear shocks for 1980–1989 Ford Bronco
  • Listed rear lift method is add-a-leaf; rear lift components are block and U-bolt
  • Lift height range 6–7 inches; shocks included
  • Fits Custom, Eddie Bauer, Ranger XLT, XLS, XLT and XLT Lariat versions

Description

Overview

The Pro Comp K4077T is a 6-inch stage 1 lift kit with PRO-X front and rear shocks for the 1980–1989 Ford Bronco. The lift height range is 6 to 7 inches, and the shocks come with the kit.

The rear lift method is add-a-leaf, and the rear lift components are block and U-bolt. Check the rear hardware in the box against both before installing the kit.

Key features

  • 6-inch stage 1 lift for the 1980–1989 Bronco
  • PRO-X front and rear shocks, included
  • Add-a-leaf rear lift method.
  • Block and U-bolt rear lift components.
  • Lift height range of 6 to 7 inches

Rear suspension basics

Rear lift hardware carries the axle’s position and load, so it deserves attention before the truck goes back on the road. Add-a-leaf setups add a leaf to the existing pack, while block-style lifts raise the axle with spacers and U-bolts. Each approach changes the pinion angle differently, and an off angle is a common cause of driveshaft vibration.

On an older Bronco, rust in the spring perches and tired bushings are worth inspecting before reassembly. Clean mounting surfaces and replace any cracked or deformed hardware. After the first drives, check U-bolt thread engagement and retorque fasteners, since they can settle under load.

  • Measure rear pinion angle after installation
  • Check U-bolt thread engagement and torque
  • Inspect the leaf pack for cracked or broken leaves
  • Confirm the brake line has slack at full droop

Specifications

Brand Pro Comp Suspension
Part number K4077T
Suspension type Lift kit, stage 1
Lift height 6 inches, listed range 6–7 inches
Front shocks PRO-X
Rear shocks PRO-X, included
Rear lift method Add-a-leaf
Rear lift components Block and U-bolt
Shocks included Yes

Vehicle fitment

It fits the 1980–1989 Ford Bronco in the Custom, Eddie Bauer, Ranger XLT, XLS, XLT and XLT Lariat versions.

Fitment is limited to the 1980–1989 Bronco. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Because the listed rear lift method and components differ, confirm the rear hardware with the manufacturer before installing. A lift this size also changes the driveline angles and alignment on an older Bronco, so check both afterward.

What’s included

PRO-X front and rear shocks, and the rear lift parts for this kit. Check the box contents against the rear lift method before starting.

SKU: EXPK4077T Categories: ,

Fitment

VehicleYearsTrims
Ford Bronco1980–1989Custom, Eddie Bauer, Ranger XLT, XLS, XLT, XLT Lariat

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp K4077T fit a 1985 Ford Bronco XLT?

Yes. The 1980–1989 Ford Bronco is in the listed fitment, and the XLT is one of the versions named. Make sure the year and version on your Bronco appear in the list.

Is the rear lift on the K4077T add-a-leaf or block and U-bolt?

The specifications list both: the rear lift method is add-a-leaf, and the rear lift components are block and U-bolt. Confirm the rear hardware with the manufacturer before installing.

Does the K4077T fit a 1990 Ford Bronco?

No. Fitment covers the 1980 to 1989 Bronco only, so 1990 and newer models are not included in this kit's fit.

Can a Bronco use both add-a-leaf and block hardware?

Only one rear method is installed at a time. Identify the rear hardware in the box, then match it to the installation steps. If anything is unclear, ask the seller or an installer before cutting or drilling.

What should I check on the front end after a lift?

Check the front driveshaft angle, the alignment, and the steering components for looseness. Inspect ball joints, tie rod ends and track bar mounts, because a higher ride height changes how they work together.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ford Bronco Lift Kits on Amazon