Overview
The Pro Comp K4078B is a 6-inch stage 2 coil spring lift for the 1981–1989 Ford Bronco. The front uses coil springs with radius arms, and the rear is raised with add-a-leafs. The lift height range is 5 to 6.99 inches.
ES3000 front and rear shocks are supplied, with bump stop extensions, a pitman arm for steering correction and extended length brake lines. The shock boots are not included.
Key features
- 6-inch lift, stage 2
- Front coil springs with radius arms
- Rear add-a-leaf lift
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
Stage 2 radius arm upkeep
Radius arms take the place of stock control arms, so the front axle moves along a fixed arc that the bushings must control. Over time the rubber softens and the mounts can work loose, which shows up as vague steering or a clunk when braking. Inspect the bushings and their hardware on a regular schedule and replace any that have cracked or separated.
A stage 2 build often pairs the radius arms with a fresh alignment and a close look at the steering linkage. After the rear add-a-leafs are installed, the driveshaft angles change and should be measured, since mismatched angles cause vibration. Keep a simple log of torque settings and inspection dates so trouble spots are easy to spot later.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4078B |
| UPC | 614901125214 |
| Lift | 6 inches, stage 2 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arms |
| Rear lift | Add-a-leafs |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits 1981–1989 Ford Bronco models. Confirm year, model and trim against your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms change the front axle location and caster, so the alignment should be set after installation. Check the rear driveline angles once the add-a-leafs are in, since the rear lift changes them.
What’s included
The kit includes front coil springs, radius arms, bump stop extensions, a pitman arm, extended length brake lines, rear add-a-leafs and ES3000 front and rear shocks. Shock boots are not included.









