Overview
The Pro Comp K2197BP is a 6-inch stage 1 lift kit with monotube shocks for the 2014–2018 Ram 2500. It uses monotube front and rear shocks, a spacer as the rear lift component, and a lift height range of 6 to 7 inches. It is a direct fit for the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman versions.
The kit was developed for the 2014–2018 Ram 2500 and is designed to work with driver assistance features, including blind spot monitoring, surround view cameras, lane departure warnings, smart cruise control and guided parking. It is offered with monotube shocks, and 4-inch and 6-inch kits are available for this truck.
Key features
- 6-inch stage 1 lift for the 2014–2018 Ram 2500
- Monotube front and rear shocks, included
- Spacer rear lift component
- Lift height range of 6 to 7 inches
- Designed to work with driver assistance features
Driver assistance and suspension
Lifting a truck changes the camera and radar angles relative to the road, so driver assistance sensors may need recalibration after the height changes. Surround view cameras and lane departure systems rely on a level stance, and a spacer lift that tilts the truck can shift what the sensors see. Ask for a calibration check at the same visit as the alignment.
Monotube shocks are a common choice for lifted trucks because they handle heat and sustained load well. Keep a record of shock length and ride height, and reinspect spacer bolts and rear mounts after rough driving. A spacer lift keeps the stock rear axle location, which can make the rear feel high relative to the front.
- Recheck sensor calibration after the lift
- Inspect rear spacer bolts at each service
- Compare front and rear ride height after install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2197BP |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | Monotube |
| Rear shocks | Monotube, included |
| Rear lift component | Spacer |
| Shocks included | Yes |
Vehicle fitment
It fits the 2014–2018 Ram 2500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman versions.
It covers the 2014–2018 Ram 2500 only. Confirm the year and trim on your truck before ordering.
Installation notes
The spacer raises the rear, so check driveline angles and alignment after installation. Confirm the driver assistance features work with your truck’s installed options, since factory options vary by build.
What’s included
Monotube front and rear shocks and the rear spacer, plus the kit components Pro Comp describes for the 2014–2018 Ram 2500.


















